| Hobie Forums http://www.hobie.com/forums/ |
|
| Fin puncture damage on Mirage Drive http://www.hobie.com/forums/viewtopic.php?f=26&t=40288 |
Page 1 of 1 |
| Author: | AndrewJazzz [ Sun Nov 27, 2011 12:04 am ] |
| Post subject: | Fin puncture damage on Mirage Drive |
The metal rod on my turbo fin popped though - punctured - the blade near the bottom. Is this a manufacturing defect? How can it be repaired? Cheers - Andrew |
|
| Author: | mmiller [ Mon Nov 28, 2011 6:03 pm ] |
| Post subject: | Re: Fin puncture damage on Mirage Drive |
Not a defect... you have struck bottom at some point. Typically this stretches the fin out a bit and then the mast pokes through the side of the fin an inch or more down. There are topics in these forums about fin repair, but the fins are also inexpensive if they need replacement. I did a search for fin +repair search.php?keywords=fin+%2Brepair&terms=all&author=&sc=1&sf=all&sk=t&sd=d&sr=posts&st=0&ch=300&t=0&submit=Search |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|