I have just taken delivery of the Revo 11 and started drilling madly. I thought I would post some pictures of what I am doing. So some general ones to start with whilst stuff like the Geartrac is in transit from the US.
I have a Humminbird on the way so have set about the battery whilst it is in the post. I have the normal 12v sealed cell in a waterproof divers box with fuse (and spare) inside and a waterproof connector on the end.
I am mounting this through the rear hatch to leave the option of an Evolve battery in the front.
The battery is going to sit in a tray which is silicone or sikaflex fixed to the hull so the battery can drop into it through the hatch.
It is quite a snug fit but i might put a bungee over the top for those upside down events. I will finish with some liberon extreme varnish before mounting.
Next things on the list are:
Dry Crate - idea from http://www.saltwaterkayakfisherman.com/
Anchor trolley - now installed and initial tests work ok
Geartrac - on the boat from the States at the moment
Side imaging Humminbird - in the post
Transducer mount - Ram have anew one out in November so we have to wait for that
Evolove drive - Having had a frantic pedal up the Thames last weekend in mega currents (when i got home and looked up the flow rates they were on red and advising no self powered vessels out) so I figure that the evolve will be a good safety item. I am going down to Poole at the weekend to take a look.
So more info as it happens