Hobie Forums
http://www.hobie.com/forums/

RIGGED REVOLUTION
http://www.hobie.com/forums/viewtopic.php?f=26&t=46012
Page 1 of 1

Author:  rubone47 [ Tue Dec 18, 2012 7:16 pm ]
Post subject:  RIGGED REVOLUTION

[youtube]http://www.youtube.com/watch?v=by1tZNWgpFw[/youtube]

Author:  Elgeebee [ Tue Dec 18, 2012 7:26 pm ]
Post subject:  Re: RIGGED REVOLUTION

Good job... :D

Author:  BentRodyakker [ Wed Dec 19, 2012 9:44 am ]
Post subject:  Re: RIGGED REVOLUTION

Nice set up! 8)

thanks for sharing

Author:  SteveLIBS [ Wed Dec 19, 2012 4:45 pm ]
Post subject:  Re: RIGGED REVOLUTION

Awesome rig!
Hey, I noticed West Lynn Creamery crates...are you from Lynn?
I'm very close. Fish off Nahant sometimes.

Author:  rubone47 [ Wed Dec 19, 2012 5:01 pm ]
Post subject:  Re: RIGGED REVOLUTION

No N.J.

Author:  ben guss [ Thu Feb 07, 2013 3:47 pm ]
Post subject:  Re: RIGGED REVOLUTION

Who makes those rods holder rails system?
thanks for sharing your nice rig!

Author:  mmiller [ Thu Feb 07, 2013 3:57 pm ]
Post subject:  Re: RIGGED REVOLUTION

Yakattack. We carry their stuff in our catalogs.

http://static.hobiecat.com/digital_assets/International-KayakFall12.pdf

Page 28 (Fall 2012 Hobie Parts and Accessories Catalog)

Author:  gdub16 [ Sun Feb 10, 2013 7:29 pm ]
Post subject:  Re: RIGGED REVOLUTION

Looks good is that a 11 or 13?

Cheers

Greg

Author:  augaug [ Sun Feb 10, 2013 7:36 pm ]
Post subject:  Re: RIGGED REVOLUTION

That looks like a 13 to me. Pretty sure it is.

Author:  Wndrfl [ Mon Feb 11, 2013 2:01 pm ]
Post subject:  Re: RIGGED REVOLUTION

@Matt Miller

Forgive me if I am mistaken but I do not see the new YakAttack Geartracs (GT90) in the catalog you provided. I only see the wider version (GT175)

The Geartracs in the video are the new GT90s by YakAttack which are narrower and fit the gunwales of the Revo very nicely.

The ones that I see in the catalog (GT175) are wider than the gunwales and one will encounter overhang in some areas.

For reference, Hanover-Yakker used the GT175 on his Revo 11. I can't find his Hobie forum post, but here is a link and picture from his blog and showing the installation of the GT175 (note the overlap where the footrests are located):
Image
http://froggin4bass.blogspot.com/2012/02/time-to-get-in-gear.html

In contrast, here are some photos of my installation of the GT90s on the fore and aft gunwales of my Revo 13 and my 2006 Adventure:

Revo:
Image
Image




Adventure:
Image

Author:  rubone47 [ Mon Feb 11, 2013 7:46 pm ]
Post subject:  Re: RIGGED REVOLUTION

Wndrfl wrote:
@Matt Miller

Forgive me if I am mistaken but I do not see the new YakAttack Geartracs (GT90) in the catalog you provided. I only see the wider version (GT175)

The Geartracs in the video are the new GT90s by YakAttack which are narrower and fit the gunwales of the Revo very nicely.

The ones that I see in the catalog (GT175) are wider than the gunwales and one will encounter overhang in some areas.

For reference, Hanover-Yakker used the GT175 on his Revo 11. I can't find his Hobie forum post, but here is a link and picture from his blog and showing the installation of the GT175 (note the overlap where the footrests are located):
Image
http://froggin4bass.blogspot.com/2012/02/time-to-get-in-gear.html

In contrast, here are some photos of my installation of the GT90s on the fore and aft gunwales of my Revo 13 and my 2006 Adventure:

Revo:
Image
Image




Adventure:
Image


Yes they are the GT 90 I installed them with the full backing plate .It was probably over kill but I wanted to make it as strong as I could and it is. I finished both my revo and outback and will be coming out with a new more detailed video soon

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/