|
Site Rank - Admiral |
Joined: Mon Jul 04, 2011 7:12 pm Posts: 184 Location: Columbia, MD
|
I have and like the Skwoosh High Back with lumbar. I modified it for my i12S, so I can't speak to how it will fit a Revo.
I melted two holes through the webbing at the bottom of the back, where the peg holes are in the Hobie seat. I then used two stainless bolts to attach the Skwoosh on top of the Hobie seat bottom pad. Gives a little more lift & padding than just the Skwoosh pad. I'd think you could do something similar for the Revo, just use the pegs instead of screws. Hope that makes sense.
I like the seat. It's about 2" taller than the Hobie. It's a wrap around design with stiffeners in the back, so it supports your sides & back with very little twist. I hate all the twist in the Hobie seat.
Keep an eye on the construction quality of the Skwoosh. I had to return the first one I got because the stitching was REALLY bad & there was an unstitched piece of binding on the seat pad. Replacement seat was fine.
You may want to wait a few months to see if Hobie introduces a new seat this year. Search around on the forum. There's a few threads on this.
Good luck!
|
|