Hobie Forums
http://www.hobie.com/forums/

Leaks in the REVO
http://www.hobie.com/forums/viewtopic.php?f=26&t=8202
Page 1 of 1

Author:  mg2969 [ Sun Oct 28, 2007 1:52 pm ]
Post subject:  Leaks in the REVO

Went hoopin for Lobsters for the first time to weeks ago and developed a serious leak. I was pump out @ 1" of water every 30 min from inside the hull. The next day after skunkin out I brought the REVO back to XTREAMLINE Sports in San Pedro. Greg water tested it and found a double leak !!!

The plastic had cracked under the cams that lock in the mirage drive. Basically it started from the threads that hold the 3-4 in stainless steel bolts that hold the cams down.

Unfortunately most of Hobie's staff was off on work in Fiji, must be nice
:D

Needless to say Hobie sent a replacement REVO, it took 2 weeks, although the Hobie HQ is only like 60-90 minutes away. I think that my delivery was based on their delivery schedule to the Los Angeles area. I think it was totally appropriate.

Will be doing sea trials with some fishing monday morning. Thanks HOBIE and XTREAMLINE , you guys rock !!!!!!!

MikeG

Author:  tigerider [ Wed Oct 31, 2007 11:33 pm ]
Post subject: 

Mike,
Thanks good to know, Hope your new unit is ok..
I have an 07 hull fron Xstreamline on 10-10-07
I put 6 hr's on so far so good.. Is there a way to check without removing the bolts ?

Author:  mg2969 [ Fri Nov 02, 2007 10:31 am ]
Post subject: 

Unfortunately not really
The black plastic cams covered it.

We actually had to do an inverted water test to find it

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/