Hobie Forums http://www.hobie.com/forums/ |
|
Sailing the Revolution! http://www.hobie.com/forums/viewtopic.php?f=32&t=4709 |
Page 1 of 2 |
Author: | Apalach [ Mon Aug 28, 2006 6:47 pm ] |
Post subject: | |
Dang RR--you seem to always be in the right place at the right time! You sure you're not stalking that dealer and his staff? But thanks for the great report and info about sailing the Revo. And also many thanks, and congrats to your wife for all the great photos! The more I hear about the Revo, the better I like it! We shall see... Best, Dick |
Author: | denizen [ Mon Aug 28, 2006 8:13 pm ] |
Post subject: | |
Thanks for the report - up to par with many of your other posts getting new high quality information to us. Some folks are wine tasters and reviewers. You seem to be a new Hobie product taster and reviewer! Nice gig. How do I get that job? |
Author: | jack8973901 [ Tue Aug 29, 2006 9:32 am ] |
Post subject: | which would you chose |
Road runner, If you were going to chose one kayak now would you chose the adventure or the revolution? jack |
Author: | Apalach [ Tue Aug 29, 2006 11:25 am ] |
Post subject: | |
RR, Re the sheeting position--interesting idea, but I sure hope the end result does not simulate your pic. RR quote: "Come to think of it, maybe I can interest my wife in the Revo and we can trade back and forth like Apalach does...." Be careful--you both may decide you like the same boat best! |
Author: | Roadrunner [ Tue Aug 29, 2006 11:38 am ] |
Post subject: | |
denizen wrote: Thanks for the report - up to par with many of your other posts getting new high quality information to us. Thanks. You just never know when an opportunity will suddenly materialize out of nowhere! When it does, it's gratifying to payback the forum that has taught me so much!
Some folks are wine tasters and reviewers. You seem to be a new Hobie product taster and reviewer! Nice gig. How do I get that job? Speaking of the forum, there have been a lot of great contributors, but one stands out for me -- Apalach -- his contributions have set the bar! His reports on the Adventure last year were influential in my decision. His style of demonstrating with pictures has been outstanding. As a resource, he has shared his own wealth of experience and that of others. His creative innovations have shown how you can customize a factory product to your suit your own needs. In fact, at times I've thought he was a secret consultant for Hobie! For instance, looking at Hobie's new Sidekick one can easily see the origins in Dick's lobster pods. Maybe he is! I am sure there have been others as well, but in my time, Apalach has really set the standard! Many thanks, Dick for showing us all how to do it! |
Author: | New2Yak [ Tue Aug 29, 2006 2:32 pm ] |
Post subject: | |
Hey, RR! I am very curious about this idea of a traveller at the rear of the yak. I remember you and Punch discussing this idea on the rear of AI, and now see you have made one on the rear of your Adv. I assume this lets you control the curve of the sail by moving the point of attachment around? I assume this adds efficiency? I don't fully comprehend what a proper traveller would be. My main question is, assuming the traveler is a rope tied between two points, would the sail attachment would be on pulley, free to pick it's location? Or would you rig the traveller to move like a clothes line on pulleys, and hard tie the sail attachment point (harken block for sail rope) to the traveller rope so that you can adjust the curve to your liking? Thanks |
Author: | Apalach [ Tue Aug 29, 2006 3:05 pm ] |
Post subject: | |
Aw shucks RR, but thanks for the comments. Next time I get out SoCal way to visit my bro and his family in Newport, I may have to take a run down the coast to check out the yak scene there, and mebbe get a guided tour of the Hobie works! I mean you guys are almost next door neighbors! Best, Dick |
Author: | Roadrunner [ Tue Aug 29, 2006 4:50 pm ] |
Post subject: | |
New2Yak wrote: Hey, RR!
I am very curious about this idea of a traveller at the rear of the yak. I remember you and Punch discussing this idea on the rear of AI, and now see you have made one on the rear of your Adv. I assume this lets you control the curve of the sail by moving the point of attachment around? I assume this adds efficiency? I don't fully comprehend what a proper traveller would be. My main question is, assuming the traveler is a rope tied between two points, would the sail attachment would be on pulley, free to pick it's location? Or would you rig the traveller to move like a clothes line on pulleys, and hard tie the sail attachment point (Harken block for sail rope) to the traveller rope so that you can adjust the curve to your liking? Thanks Sails have a deceiving number of adjustments on most sailboats. Minimally, you usually have a downhaul, outhaul, boom vang and traveler. The beauty of the Hobie sail is its simplicity -- no adjustments. But because of that, it sacrifices efficiency. Most travelers consist of a rail or bar across the stern (or cockpit) of the boat, with adjustable stops. The one I made is called a bridle and is not adjustable ( so far). The main sheet attaches to this bridle by the use of a block (pulley) which is free to slide back and forth. The idea here is, in order for the sail to drive you forward, it must angle off from the longitudinal axis of the boat. The wind does this for you by puffing the sail out to one side or the other. The traveler helps the wind do this, and at the same time, allows you to flatten the sail (with more tension), thus making the sail shape more efficient. Because the aft end of a kayak is so narrow anyway, there is no need for any stops on the traveler. Theoretically, wider would be better. In this case, the mainsheet will operate at either end of the traveler virtually all of the time. My primary objective is to change the sheeting angle by moving the block forward. My secondary objective is to gain further efficiency by use of the small bridle. I suspect the ideal position here is about 8" aft from the pictured location, but before I start drilling, I want to see what happens with this arrangement. There is also the possibility that, as the mainsheet wraps around the seat, it may over power the traveler on the port side -- If so, I may have to go back to a fixed position. We'll see! There are several excellent sailing books available. My favorite and constant reference is a little paperback called Royce's Sailing Illustrated For our purposes, any old edition is fine (You don't need the latest expensive 2 volume set). You can probably find one on e-bay for a few bucks. |
Author: | Apalach [ Tue Aug 29, 2006 5:26 pm ] |
Post subject: | |
RR, I have to second the motion re Royce's. That has been my sailing and small boating bible for many years now. You only need Volume I. Volume II is the same material, but organized for classsroom use. |
Author: | kepnutz [ Wed Aug 30, 2006 7:42 am ] |
Post subject: | Still learning |
Hey Y'all Interesting topic and great food for thought. I have been sailing the tandem around a lot more and have been flattening the sail "hard" when approaching a heavier gust of wind in order to "depower" the sail. On the upwind tacks this has seemed to reduce the amount of extreme heel and feels a bit easier to manage. I also sail as close as possible so that I might point directly into the wind quicker if the gust proves too strong. This "Flatter" sail method has also helped us on downwind jibes as it does not tend to overpower the rudder as much when switching tacks. I dont know if this is correct but it has helped my confidence using the sail. I too have also mounted a harken block to the rear pad eye and even had that block attached to the pad eye with a longer shackle at first but I could not seem to get the smooth aerodynamic wing shape of the sail when sailing upwind. The sail just looked wrinkled and pinched in the area where the sheet is attached so I took the shackle off. At times the sail still looks this way even with just the block. Am I doing something wrong here or is my sail just wrinkled from been folded and stored in the sail bag..? thanks -kepnuts- ps. I always thought roadie and apalach were "both" Hobie testers disguised as regular forum users, I would not be suprised if this was true |
Author: | Apalach [ Wed Aug 30, 2006 8:08 am ] |
Post subject: | |
Quote: I always thought roadie and apalach were "both" Hobie testers disguised as regular forum users, I would not be suprised if this was true
Hey kepnutz, That's a pretty good one, I'll have to admit! Never crossed my mind that someone might think that I, a simple but devoted Hobie Miragaholic, would be mistaken for a Hobie staffer. But, hey, if the gig was ever offered, I would be the first to sign up! Come to think of it, I believe Hobie is badly in need of a Gulf Coast/East Coast resident tester at large. I mean, the weather, winds, currents, salinity, wave action, and fishes are totally different back here than on the Pacific Coast, dontcha know? |
Author: | Roadrunner [ Wed Aug 30, 2006 10:44 pm ] |
Post subject: | |
Apalach wrote: Quote: I always thought roadie and apalach were "both" Hobie testers disguised as regular forum users, I would not be suprised if this was true ... if the gig was ever offered, I would be the first to sign up! And I would be the second! All those neat toys to play with, or rather to test! Wouldn't have to try to catch those dealer demos! By the way, I'd be interested in Apalach's review on the Revo, as compared with his Outback and his (wife's) Sport. Perhaps one will show up down there soon! |
Author: | dwest [ Thu Aug 31, 2006 3:32 am ] |
Post subject: | Sweet posts, collecting ideas for Adventure Island sailing |
RoadRunner and Apalach - great stuff, thanks. I look forward to adapting your rigging suggestions to the Adventure Island I hope to pick up in mid-September. As I get experience I will post whatever small contributions make sense. Thanks again and please keep it up! |
Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |