| Hobie Forums http://www.hobie.com/forums/ |
|
| M20 bungee set up in front cross bar http://www.hobie.com/forums/viewtopic.php?f=34&t=35224 |
Page 1 of 1 |
| Author: | Ryno [ Thu Apr 28, 2011 2:42 am ] |
| Post subject: | M20 bungee set up in front cross bar |
How do I set up the trapeze bungee in the front cross bar of a 20. I have 2 blocks on each end cap. Thanx Ryno |
|
| Author: | mmiller [ Thu Apr 28, 2011 3:46 pm ] |
| Post subject: | Re: M20 bungee set up in front cross bar |
Criss crosses. Takes two shock cords. In the one side to the block on opposite and back to the "exit" side to tie off. |
|
| Author: | MVD [ Sat Apr 30, 2011 8:42 pm ] |
| Post subject: | Re: M20 bungee set up in front cross bar |
I tied an end of the shock cord to a batten to push it through from one side to another. |
|
| Author: | Ryno [ Wed May 04, 2011 6:33 pm ] |
| Post subject: | Re: M20 bungee set up in front cross bar |
Thanx Guys |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|