Hobie Forums
http://www.hobie.com/forums/

H20 Jib Cable length?
http://www.hobie.com/forums/viewtopic.php?f=34&t=48154
Page 1 of 1

Author:  tmason [ Mon Jun 24, 2013 7:05 am ]
Post subject:  H20 Jib Cable length?

I just picked up a 1999 H20, it came with a Roller Furler for the Jib, when we tried to rig it the cable was approx 12+ inches to long. The cable length is approx 22' 3" which is the length for the stock cable. Is this the proper length for the roller furled jib or should it be a different?

tm

Author:  srm [ Mon Jun 24, 2013 10:36 am ]
Post subject:  Re: H20 Jib Cable length?

Per the Hobie wire guide, the jib halyard wire for a H20 with roller furler should be 21'-2 1/2" long.

The stock jib wire halyard (non-furler) is 22'-3".

sm

Author:  tmason [ Mon Jun 24, 2013 12:05 pm ]
Post subject:  Re: H20 Jib Cable length?

Thanks SRM, looks like I'll be buying a new cable as well

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/