Comparing the H20 parts guide to my H20, it looks like the previous owner installed the Jib Cars backwards. Pic is looking forward on the starboard side.
![Image](https://i.imgur.com/0lS5lyO.jpg)
![Image](https://i.imgur.com/ef8sAuq.jpg)
Is there any reason they would do this?
Also, the parts guide lists a Jib Block Wire for boats above SN CM0191XXXX. My boat HN is CCMP0642C000. Am I looking at the wrong number? And should the Spectra line be very tight? It seems like the jib/tramp track is getting pulled away from the hulls from the tension.
![Image](https://i.imgur.com/79Hjuif.jpg)
![Image](https://i.imgur.com/co7ukBI.jpg)
I'm guessing the Jib Sheet Adjustment Line should be on top of the tramp tunnel, not through it? At least the part with the bungee that attaches to the jib sheet blocks.
![Image](https://i.imgur.com/gupVXxf.jpg)