Hobie Forums http://www.hobie.com/forums/ |
|
Front crossbar. http://www.hobie.com/forums/viewtopic.php?f=34&t=8169 |
Page 1 of 1 |
Author: | arnis [ Mon Oct 22, 2007 5:38 pm ] |
Post subject: | Front crossbar. |
I have a 1992 Hobie Miracle. Barber Hauler line for jib runs thru the front crosbar. Newer models have that line run on the outside of a crossbar. My question is ,if I want to do that to my boat do I have to buy new crossbar in order to install Barber Hauler cleats on the outside of the crossbar since my old one has a openings at the both ends from the old system? I am trying to bring my rigging up to the date. Arnis |
Author: | Big Jib & the Uni's [ Mon Oct 22, 2007 5:50 pm ] |
Post subject: | |
arnis, Is it broke? Replacing lines thru crossbar can be as simple as tying a new line to the old unless...they go through a block, then you'll have to be more creative, like stitching the old line to a new line. A knot more than likely will not pull through a turning block. Alternative to replacing your crossbar is abandoning the existing system in place, and running your line all external and mounting swivel cleats at the, aft-side, ends of the crossbar. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |