Hobie Forums http://www.hobie.com/forums/ |
|
Tiger Self Tacking Jib Car Help http://www.hobie.com/forums/viewtopic.php?f=37&t=11093 |
Page 1 of 1 |
Author: | Sail Revolution [ Tue Oct 28, 2008 4:06 pm ] |
Post subject: | Tiger Self Tacking Jib Car Help |
Anyone know the manufacturer's part # for the jib car on a Tiger? Thanks for the help. |
Author: | hobie18rich [ Tue Oct 28, 2008 8:15 pm ] |
Post subject: | |
try your local dealer jeremy............ oops 5 - 99500810 : Chariot de foc Jib car That any help |
Author: | One Hull Up [ Wed Oct 29, 2008 7:43 am ] |
Post subject: | |
I'm taking a bit of a guess on the track size but this sounds right. maybe sombody can confirm it for you. but it is probably either: Harken 2726 or 2727. track width is 7/8". 2727 has a higher max working load 850lbs compared to 500lbs. Hope this helps Seamus |
Author: | Sail Revolution [ Wed Oct 29, 2008 11:44 am ] |
Post subject: | |
hobie18rich wrote: try your local dealer jeremy............ oops
5 - 99500810 : Chariot de foc Jib car That any help He tries, but he's kind of an idiot... Thanks for the help One Hull. Probably the 500# would be my guess. J |
Author: | hobie18rich [ Wed Oct 29, 2008 11:50 am ] |
Post subject: | |
But we still love ya Jeremy. Your from santa cruz its ok to flake out a little. Just not with my parts. O.K. we just like your wife and kid, and need "TerraPhobia" for the committee boat and the skif for a chase. Wow you do alot for us in Div 3. |
Author: | Sail Revolution [ Wed Oct 29, 2008 11:56 am ] |
Post subject: | |
Just talked to Harken and it's the High load. The difference is the Torlon ball bearings. Thanks for the lead One. J |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |