Hobie Forums http://www.hobie.com/forums/ |
|
Spinnaker Sheet Length for Double Blocks http://www.hobie.com/forums/viewtopic.php?f=37&t=29688 |
Page 1 of 1 |
Author: | gavparker [ Sun Aug 15, 2010 11:43 pm ] |
Post subject: | Spinnaker Sheet Length for Double Blocks |
Hi All Does anyone know what length the spinnaker sheet should be for when we convert our Tiger to a double block set up? The sheet supplied will be too short but I don't know by how much. Also, any tips on attaching a thin "leader" line for the clew?? Thanks in advance. |
Author: | Johan !! [ Tue Aug 24, 2010 12:44 am ] |
Post subject: | Re: Spinnaker Sheet Length for Double Blocks |
Our spi sheet length is 13,6 m The sheet is conneted to the spinaker in the middle with a short line spliced The ends go to the ratling bloks near the daggerboards and then to the frontbeam blocks |
Author: | Dan DeLave [ Fri Aug 27, 2010 10:45 am ] |
Post subject: | Re: Spinnaker Sheet Length for Double Blocks |
Mine are from 44 to 52 feet. They always get some adjustment while determining what works. |
Author: | gavparker [ Mon Aug 30, 2010 7:27 pm ] |
Post subject: | Re: Spinnaker Sheet Length for Double Blocks |
Thanks guys. 8mm?? |
Author: | Johan !! [ Tue Aug 31, 2010 6:40 am ] |
Post subject: | Re: Spinnaker Sheet Length for Double Blocks |
gavparker wrote: Thanks guys. 8mm?? Yes 8mm |
Author: | gavparker [ Thu Sep 02, 2010 3:03 am ] |
Post subject: | Re: Spinnaker Sheet Length for Double Blocks |
Oooooh, pretty!!! Yellow goes to the clew. Why are the two ends tapered and where do they go to??? I want it! |
Author: | Johan !! [ Thu Sep 02, 2010 11:07 am ] |
Post subject: | Re: Spinnaker Sheet Length for Double Blocks |
The ends go to the bloks ,Its more easy,to put the spi tru teh bloks The little rope in the middle is connected to the spi |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |