Hobie Forums http://www.hobie.com/forums/ |
|
Tiger Boom and Spinnaker Pole material http://www.hobie.com/forums/viewtopic.php?f=37&t=31956 |
Page 1 of 1 |
Author: | eshpilberg [ Sun Sep 19, 2010 9:35 am ] |
Post subject: | Tiger Boom and Spinnaker Pole material |
I am seeking the Aluminum extrusion dimensions and material definition of 1. Main boom 18012817 2. Spinnaker Pole 18062645 |
Author: | Trentpt17 [ Sun Jul 03, 2011 9:43 pm ] |
Post subject: | Re: Tiger Boom and Spinnaker Pole material |
Did you ever find the specifications - ID and OD? Thanks Trent |
Author: | eshpilberg [ Mon Jul 04, 2011 12:37 pm ] |
Post subject: | Re: Tiger Boom and Spinnaker Pole material |
Hi I baught 40mm Dia pipe with 2mm wall thickness I choose 6061-T6 material this was based on my personal measurements and assessment, I hope I do NOT misleading anyone Eyal |
Author: | Trentpt17 [ Mon Jul 04, 2011 8:50 pm ] |
Post subject: | Re: Tiger Boom and Spinnaker Pole material |
Thanks. Did you buy metric material or 1 1/2" x .083"wall? If metric, do you have a recommendation for a supplier. Thanks again. Trent |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |