From Jacques.
| Hobie Forums http://www.hobie.com/forums/ |
|
| Tiger deck seperation http://www.hobie.com/forums/viewtopic.php?f=37&t=39410 |
Page 1 of 1 |
| Author: | davenorvell [ Mon Oct 24, 2011 4:52 pm ] |
| Post subject: | Tiger deck seperation |
While pointing yesterday we noticed the deck on the port hull separating from the hull adjacent to the bridle. See pictures at https://public.me.com/davenorvell How do I reattach the deck? What should I use for adhesive? |
|
| Author: | NSBPaul [ Mon Oct 24, 2011 5:39 pm ] |
| Post subject: | Re: Tiger deck seperation |
Contact Jeremy at Surf City Catamarans. He's the expert at these type of repairs. http://surfcityracing.org/ https://www.facebook.com/surfcitycatamarans?sk=info |
|
| Author: | Jbernier [ Tue Oct 25, 2011 8:23 am ] |
| Post subject: | Re: Tiger deck seperation |
E mail sent, with info for you. |
|
| Author: | Sail Revolution [ Tue Oct 25, 2011 8:50 am ] |
| Post subject: | Re: Tiger deck seperation |
From Jacques. |
|
| Author: | Sail Revolution [ Tue Oct 25, 2011 8:54 am ] |
| Post subject: | Re: Tiger deck seperation |
I'd use vinylester thickened with milled fibers. Even pressure after gluing is key, and not so much that you squeeze all of the glue out. Surface prep is also very important. I'd rough up the flange with 80g. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|