Hobie Forums http://www.hobie.com/forums/ |
|
Twist-and-seal hatch retrofit http://www.hobie.com/forums/viewtopic.php?f=42&t=38205 |
Page 1 of 1 |
Author: | dblejeune [ Fri Sep 02, 2011 8:58 am ] |
Post subject: | Twist-and-seal hatch retrofit |
This question is probably best directed to Matt, unless someone else has done this retrofit. I have a Bravo, 2004 I think, with the old-style hatches with the removable lids. They seem to leak some despite cleaning and lubing the seals, so I'm considering replacing them. The question is, will the newer style twist-and-seal hatches directly replace the old 6" and 8" hatches without modification? In other words, will the mounting hole pattern line up? By the way, how can I tell for sure what year model my boat is? I seem to have read that the last two digits of the serial number indicate the year. Is this correct? |
Author: | mmiller [ Fri Sep 02, 2011 9:09 am ] |
Post subject: | Re: Twist-and-seal hatch retrofit |
The 6" is a match for the old Viking hatch hole pattern. The 8" requires 2 extra screws. Get the hatch "retro kits". That includes mounting gaskets and the screws needed on the 8". 71701001 HATCH 6" TWIST-N-SEAL RETRO Hatch and gasket kit Retro fit for Viking "T" handle hatches 71702001 HATCH 8" TWIST-N-SEAL RETRO Hatch, Gasket and (2) screws Retrofit for Viking "T" handle hatches Serial number decoding: http://www.hobiecat.com/support/articles/archive/?src=http://2010.archive.hobiecat.com/support/warranty/sailserial.html |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |