Hobie Forums
http://www.hobie.com/forums/

21 SE Across the pond
http://www.hobie.com/forums/viewtopic.php?f=45&t=12015
Page 3 of 3

Author:  Tom King [ Thu Jul 02, 2009 4:40 pm ]
Post subject:  Re: 21 SE Across the pond

UK, where exactly on the mast was the fitting? I'm thinking spinnaker halyard swivel cam but won't say for sure without a bit more detail.

Author:  UKSail [ Thu Sep 10, 2009 2:23 pm ]
Post subject:  Re: 21 SE Across the pond

Hi Tom, thanks for the pictures. The bit that is missing is on the rear of the mast, where the main track is, below the vang/kicker and above the main halyard roller at the bottom of the mast. I will get a picture of it.
So neally there with this boat. have made the new spinnaker pole, lets hope this one stays in one piece! the new tramp looks brilliant. Had it mad up from scratch, bit of guess work but it is nice. found a nasty split in the furler, getting that welded and the rudders well they were wrecked, top holes busted off. they are in the shop and we will have to wait and see if they make it out alive (fingers crossed)

Page 3 of 3 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/