Hobie Forums http://www.hobie.com/forums/ |
|
21-SE centerboard pivot pin http://www.hobie.com/forums/viewtopic.php?f=45&t=43072 |
Page 1 of 1 |
Author: | Bille [ Fri Jun 01, 2012 5:23 pm ] |
Post subject: | 21-SE centerboard pivot pin |
The Hobie 21-SE centerboard pivot pin is held in with (2) flat-head SS screws that look to be 1" long. Is that Really long enough ; and what should i use to keep them from backing out when i put them in ? Thanks : Bille |
Author: | Jbernier [ Mon Jun 04, 2012 11:42 am ] |
Post subject: | Re: 21-SE centerboard pivot pin |
They are #10 x 1" screws - you could use a touch of blue Loctite if you wanted - but that's how they were installed back when we still manufactured this model. |
Author: | Bille [ Mon Jun 04, 2012 8:39 pm ] |
Post subject: | Re: 21-SE centerboard pivot pin |
Thanks for the Good info ; One Less thing to think about, and my SE is not too far off from being a real Catamaran again !!!!! Bille |
Author: | gary eudy [ Tue Jun 19, 2012 8:47 am ] |
Post subject: | Re: 21-SE centerboard pivot pin |
never been a problem for me if it aint broke kind of item do not look for trouble |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |