i9s Rudder Cable Housing Kink?

After unfolding the boat after a fantastic shake down- I noticed a what appears to be a kink in the housing for the rudder cables.

There is no loss of operation.
The kink resembles a soda straw that has been permanently creased.
My intention is to practice stowing the boat in the bag avoiding this bend point.
Any input would be appreciated.

Paul P.
Sportsman’s Paradise
There is no lose of movment

I posted same/similar issue last year (July 2011) and got no replies. On my i9s, the covering actually split open revealing the hard cable housing. I just put a patch over the area and have had no further issues. I do worry sometimes about possible damage due to folding. Just the other day I notice the scuppers (on the bottom) seems to be getting bent harshly. But, again, so far just worry - no real problems. Enjoy!

_________________
----------------
Gary L.
Hobie Mirage i9s
Fishing mostly in N. Tx.