Hobie Forums
http://www.hobie.com/forums/

Cart Wheel Mirage drive hole handle guide
http://www.hobie.com/forums/viewtopic.php?f=47&t=50696
Page 1 of 1

Author:  frankfp [ Wed Mar 12, 2014 3:57 pm ]
Post subject:  Cart Wheel Mirage drive hole handle guide

I made the handle guide out of 2x2,, about 24 inches long, the bottom of the handle has a 1/2 inch slot 9 inches long that fit over the 1/2 inch horizontally bars, I used two PVC spacer to center the handle, I use a 1/4 eye bolt and wing nut to tighten the
handle to the three horizontal bars, I just slip the wood handle with the wheel cart connected
to the handle and pull it up through the Mirage Drive opening and align the cart bars with the Mirage drive cart hole, works great for me.Take care-------------Frank

Author:  frankfp [ Fri Mar 14, 2014 8:40 am ]
Post subject:  Re: Cart Wheel Mirage drive hole handle guide

Will try to send picture of cart wheel handle guide------Frank

Author:  frankfp [ Thu Nov 13, 2014 10:58 am ]
Post subject:  Re: Cart Wheel Mirage drive hole handle guide

Picture of Cart Wheel Mirage drive handle guide. Take care-------Frank
http://s1295.photobucket.com/user/Frank ... 2.jpg.html]Image[/URL]

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/