Hobie Forums
http://www.hobie.com/forums/

Sprockets - Original Stainless vs V1 vs V2
http://www.hobie.com/forums/viewtopic.php?f=60&t=46454
Page 1 of 1

Author:  mmiller [ Tue Feb 05, 2013 11:42 am ]
Post subject:  Sprockets - Original Stainless vs V1 vs V2

There have been 3 versions of sprockets.

(1) Original Drive had stainless sprockets and an aluminum spine.

The drive was changed in many ways with the addition of plastic molded parts to reduce weight and inprove our ability to make them.

(2) The 2nd version is primarily identified by the sprocket's mast retention system. These "V1" sprockets used a set screw to hold the mast in place.

Image


(3) "V2" sprockets have threaded masts.

Image

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/