Hobie Forums
http://www.hobie.com/forums/

AI pre-assembled Sprayskirt kits
http://www.hobie.com/forums/viewtopic.php?f=69&t=36481
Page 1 of 2

Author:  KayakingBob [ Thu Jun 30, 2011 8:29 pm ]
Post subject:  AI pre-assembled Sprayskirt kits

We finally have assembled some AI Sprayskirts kits which including everything necessary to quickly mount the Sprayskirt without having to drilling any holes or mounting any additional hardware to the boat.

http://www.deesquiltdesigns.com/sprayskirt

Image

Image

Installation Instructions:
http://www.kayakingbob.com/files/SprayskirtInstallationAI.pdf

Author:  Rob&Amy [ Sun Jul 03, 2011 12:20 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

I ordered one today. Thanks

Author:  mikereddy [ Thu Jul 21, 2011 6:03 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

Do these kits fit on the TI as well? thanks.

Author:  TxYackMan [ Thu Jul 21, 2011 9:57 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

He has a TI kit. I bought one, works great, very easy to install - 5-10 minutes or so for the basic install. Good stuff!

Author:  KayakingBob [ Sat Jul 23, 2011 12:29 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

Here's the link for the TI Sprayskirt kit:
http://www.hobiecat.com/forums/viewtopic.php?f=69&t=35639

Image

Author:  NOHUHU [ Mon Jul 25, 2011 7:49 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

Awww.. Wish you made them for red boats. :wink:

Author:  KayakingBob [ Mon Jul 25, 2011 9:25 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

NOHUHU wrote:
Awww.. Wish you made them for red boats. :wink:

The black looks great on red boats too! But if you can find another color of shadecloth you like better and get to me 5' (by 6' wide) Dee will make yours out of it instead of black, (even Green). 8)
Image

Image

Author:  KayakingBob [ Sat Aug 06, 2011 2:31 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

Here are the 3 mount points for the Sprayskirt kit on an AI.
Image
Image
Image

On the TI it's even easier, instead of using the pocket screws, the rear of the sprayskirt mounts over the front pocket eyelet posts.
Image

Author:  KayakingBob [ Wed Aug 31, 2011 8:56 am ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

A message from Dee my wife the Sprayskirt maker...

I wanted to let you know that I'll be heading out on a promotion tour for my quilting book in mid-Sept. and won't be back in town to sew until late Oct. I recommend you place any orders now, so I can get them finished before I jet away. Not sure if I'll have time or access to the materials I'd need to make you your sprayskirts while I'm at a hotel!

Happy Sailing,

Dee Conlon

http://www.deesquiltdesigns.com/sprayskirt

Author:  Ricky [ Fri Sep 23, 2011 8:33 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

reconlon wrote:
Here are the 3 mount points for the Sprayskirt kit on an AI.
Image


I've been looking for that gray webbing tube fabric. What is that called anyway?

Author:  KayakingBob [ Fri Sep 23, 2011 9:44 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

Ricky wrote:
I've been looking for that gray webbing tube fabric. What is that called anyway?
Do you mean shade cloth?

Author:  Ricky [ Fri Sep 23, 2011 10:01 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

The wrinkly looking gray webbing nylon tube in that photo. Looks like elastic or may have a bungee cord inside. What is that called and where can you get it?

Author:  NOHUHU [ Fri Sep 23, 2011 10:10 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

Looks like your paddle or safety leash, Bob.

Author:  Ricky [ Fri Sep 23, 2011 10:17 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

I'm trying to find that to make safety leashes with it, but I can't find it anywhere. I've got everything I need except for that material.

Author:  KayakingBob [ Fri Sep 23, 2011 10:40 pm ]
Post subject:  Re: AI pre-assembled Sprayskirt kits

Tubular webbing. It's actually my heavy duty paddle leash, was black. Should be the same as the Hobie Heavy Duty Paddle Leash. Here's one supplier of the raw material: http://tubularnylonwebbing.com/

Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/