Hobie Forums http://www.hobie.com/forums/ |
|
THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS http://www.hobie.com/forums/viewtopic.php?f=69&t=37645 |
Page 32 of 88 |
Author: | larryhts [ Fri Jul 20, 2012 5:32 pm ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Tacking in light winds, Sailing is hard work http://youtu.be/WsclyBGgM88 |
Author: | snowmonkey [ Fri Jul 20, 2012 6:38 pm ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Thank you for that larryhts. You seem to have no trouble tacking. I keep getting caught "in irons", with the sail flapping around. |
Author: | chrisj [ Fri Jul 20, 2012 6:52 pm ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
The TI tacks much easier in light winds than the AI snowmonkey. With its extra weight, its momentum carries it across the wind. Also, with its bigger sail and more buoyant amas, Larry can sit out on the windward Haka in light wind without burying the ama. That's a sweet setup you have there Larry. Even if it were possible to sink a TI, you and your passenger would still have lifeboats. |
Author: | larryhts [ Fri Jul 20, 2012 8:02 pm ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Snowmonkey, The 2 or 3 tack in the video – I get caught in the irons but reverse the rudder and let the wind push the boat back completing the tack. It faster and easy to do than peddling through the turn. Chrisj, Thanks the supermodels like to lay out on them also I never know how many people will be riding with me, I have had 4 adults and 2 grandkids on at one time, slow but fun and safe. |
Author: | NOHUHU [ Tue Aug 14, 2012 1:19 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
For you wood fans, here's Batman's latest handiwork. |
Author: | NOHUHU [ Tue Aug 14, 2012 2:00 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
and my refinished prototype 3 slat Hakas - with the Railblaza Aka mounts. |
Author: | larryhts [ Tue Aug 14, 2012 2:23 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Great work!!!! Looks very nice |
Author: | AlohaDan [ Tue Aug 14, 2012 2:31 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Nice What's the aray of PVC pipe in the background? |
Author: | CaptnChaos [ Tue Aug 14, 2012 4:21 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Thanks for posting those pictures NOHUHU - good timing. I'm building second generation hakas in the next month or so and was considering the middle brace batman has on his. I'll also be incorporating more "haka extensions" (resized) on the second set for more options in jib deployment as well as haka tenting. What kind and size fasteners do you guys use in the wood? Are they just stainless wood screws? Do you use glue too? My hakas don't look as pretty with the holes drilled in the top for the expensive stainless bolts I'm using. Do those 3 legged hakas of yours have any underbracings on them or are they free spirits that aren't too concerned about sagging. |
Author: | KayakingBob [ Tue Aug 14, 2012 5:00 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
AlohaDan wrote: Nice What's the array of PVC pipe in the background? Dan, I think that's patio furniture. |
Author: | leelanauX [ Tue Aug 14, 2012 5:20 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Two questions: How much does each weigh? How are they attached to the aluminium bars? (these may have been covered already, apologies) |
Author: | tonystott [ Tue Aug 14, 2012 6:42 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
Gee, big photos, I can't see any of them in one screen |
Author: | NOHUHU [ Tue Aug 14, 2012 11:03 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
KayakingBob wrote: AlohaDan wrote: Nice What's the array of PVC pipe in the background? Dan, I think that's patio furniture. Let's just call it the "Bat Recliner" project for now. |
Author: | NOHUHU [ Tue Aug 14, 2012 11:18 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
tonystott wrote: Gee, big photos, I can't see any of them in one screen Time to buy a bigger screen Tony? They are all posted as "Tinypics". Seriously though, I thought the Hobie site now scales the photos unless you want to blow them up? Fortunately, when it comes to Batman's craftsmanship, TMI is a good thing. |
Author: | NOHUHU [ Tue Aug 14, 2012 11:29 am ] |
Post subject: | Re: THE HAKA BENCH SEAT - AN ALTERNATIVE TO TRAMPS |
leelanauX wrote: Two questions: Around 10 and 15lb each. We use 4 standard bungles to attach each Haka to any AI or TI.
How much does each weigh? How are they attached to the aluminium bars? (these may have been covered already, apologies) |
Page 32 of 88 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |