Hobie Cat Forums

It is currently Tue Jul 22, 2014 6:59 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 159 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11
Author Message
 Post subject: Re: THE TI3 PROJECT
PostPosted: Fri May 09, 2014 1:05 pm 
Offline
Site Rank - Old Salt

Joined: Tue May 18, 2010 2:31 pm
Posts: 2653
Location: Kailua 96734
rotorhead wrote:
Where is the "add to cart" button for the ti3...
:lol: Rotor, that's a great question for Hobie.

The biggest flooding problem on this run (other than diving) came from water geysers in the cockpit. FusionBob recently pointed this out. At higher speeds, the drive well and scuppers were a real drag (even with the plug in). For us, that's true on most days, at different points of sail. Need a better seal.

On the wave rides, you also see the swells interact with various parts of the boat (understatement). On a lowrider like the TI, no part is immune, but the extra Aka bars and Hakas also scrape the wave as it passes, or when you stuff the bow.

Not much to be done about this other than design in more rocker and freeboard. Although you could start by raising and arching the Aka arms to clear the swells. It's a common feature on most outriggers here, regardless if the boats are built of wood, carbon or glass.

Image

Alas, wet Okoles are just part of the "good life" here. :wink:


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Fri May 09, 2014 4:27 pm 
Offline
Site Rank - Old Salt

Joined: Sat Nov 05, 2011 1:58 am
Posts: 1428
Location: Forster, NSW, Australia
Your garage looks impressive NOHUHU :mrgreen: :mrgreen:

_________________
Tony Stott
2012 Tandem Island "SIC EM"
www.scenefromabove.com.au


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Fri May 09, 2014 5:37 pm 
Offline
Site Rank - Old Salt

Joined: Fri Jan 05, 2007 9:21 pm
Posts: 2222
Location: Maui, Hawaii
tonystott wrote:
Your garage looks impressive NOHUHU :mrgreen: :mrgreen:

He Wishes! :lol:

_________________
Image
http://KayakingBob.com - - - - - Hobie Island Sailing since 2006 - - - - - 2011 & 2012 Hobie AIs and a 2012 TI


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Sat May 10, 2014 12:41 pm 
Offline
Site Rank - Old Salt

Joined: Tue May 18, 2010 2:31 pm
Posts: 2653
Location: Kailua 96734
Yeah - what's a "GARAGE" ? :cry:


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Sat May 10, 2014 5:25 pm 
Offline
Site Rank - Old Salt

Joined: Fri Dec 05, 2008 2:32 am
Posts: 1773
Location: Calga NSW, Australia
NOHUHU wrote:
The biggest flooding problem on this run (other than diving) came from water geysers in the cockpit. FusionBob recently pointed this out. At higher speeds, the drive well and scuppers were a real drag (even with the plug in). For us, that's true on most days, at different points of sail. Need a better seal.

viewtopic.php?f=71&t=41092&p=167490&hilit=template#p167490

_________________
Image


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Mon May 12, 2014 12:47 pm 
Offline
Site Rank - Old Salt

Joined: Tue May 18, 2010 2:31 pm
Posts: 2653
Location: Kailua 96734
3D printer anyone?


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Mon Jul 07, 2014 10:01 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Jul 07, 2014 9:54 pm
Posts: 1
HI,

I am a South African and I own a TI. I am going on an expedition this year on the Zambezi River, and my TI will be the beast of burden. Take a look at the intro video here: https://www.youtube.com/watch?v=qfKRyWt ... e=youtu.be

Due to all the crocs and also gear we are taking, I want to turn my TI into a TI3 - the rear seat is pretty low in the water as you know, and Zambezi crocs are hungry. Timing is pretty tight as I need to get all the extras needed to do so sent to me by Hobie.

Would you be able to let me know exactly which parts are required to add the extra aka?

Thank you in advance for your time. Your TI3 looks epic!

Cheers,
Steve


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Wed Jul 09, 2014 1:00 pm 
Offline
Site Rank - Old Salt

Joined: Tue May 18, 2010 2:31 pm
Posts: 2653
Location: Kailua 96734
Steve, I don't recommend this mod for your expedition. It does not add any floatation but does add extra weight and complexity. You also would lose the ability to fold the Amas. That could be important. A Stock TI is better suited to your expedition, as it has proved in the Everglades Challenge every year.

You will need to be in the saddle, pedaling much of the time (likely to attract crocs, no?) so a set of lightweight/quick release Hakas for the front and maybe a small wing seat for the rear position would be my choice. (Or you could just sit up on a padded cooler). The Hakas can carry gear and could be a great help while poling. http://www.hobiecat.com/forums/viewtopic.php?f=69&t=37645

Keep it simple, and don't feed the animals is my advice, for this trip.


Top
 Profile  
 
 Post subject: Re: THE TI3 PROJECT
PostPosted: Wed Jul 09, 2014 7:15 pm 
Online
Site Rank - Captain

Joined: Sun May 04, 2014 11:08 am
Posts: 49
Location: Rochester NY
bring a shotgun


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 159 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Vabeach2 and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group