| Hobie Forums http://www.hobie.com/forums/ |
|
| Hand rails on the PA http://www.hobie.com/forums/viewtopic.php?f=69&t=42332 |
Page 1 of 1 |
| Author: | wbrewski [ Mon Apr 23, 2012 9:27 pm ] |
| Post subject: | Hand rails on the PA |
The bungies in my hand rail are comming apart, is the rail bolted through or blinde. can i take the bolts out with out having to crawl inside to reatach the nuts? |
|
| Author: | Tom Kirkman [ Tue Apr 24, 2012 6:42 am ] |
| Post subject: | Re: Hand rails on the PA |
You'll have to remove the rails from the boat. The bungees are threaded through the pipe (rail) and out through the nylon end and secured there with a knot around a small washer. The nylon ends are fastened, on one end, with a single rivet. On the other the end will just slip off. It's a not a big deal to replace the bungees. |
|
| Author: | wbrewski [ Tue Apr 24, 2012 2:20 pm ] |
| Post subject: | Re: Hand rails on the PA |
Tom Kirkman wrote: You'll have to remove the rails from the boat. The bungees are threaded through the pipe (rail) and out through the nylon end and secured there with a knot around a small washer. The nylon ends are fastened, on one end, with a single rivet. On the other the end will just slip off. It's a not a big deal to replace the bungees. Thanks will try Wed. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|