| Hobie Forums http://www.hobie.com/forums/ |
|
| Modifying beach dolly http://www.hobie.com/forums/viewtopic.php?f=70&t=68089 |
Page 1 of 1 |
| Author: | RonE58 [ Sat Mar 27, 2021 7:19 pm ] |
| Post subject: | Modifying beach dolly |
I'm a potential TI owner, and was planning on leaving a TI on the beach on its dolly, most of the time. Now I'm learning that a TI can't be left on its dolly. Is there a way to modify the dolly, or get one that can support a TI? Thanks Ron |
|
| Author: | Ormonddude [ Thu Apr 08, 2021 11:08 am ] |
| Post subject: | Re: Modifying beach dolly |
The Problem is you're supposed to have 3 equally spaced supports to prevent warping the hull but I guess you could support the front 2/3 rds of the boat on like a 2x4 rack and let the last 1/3 be supported by the dolly but I am not a Hobie Engineer so I take no responsibility if it don't work out, but I have seen this kind of docking rack before at commercial rental places and it seems to work great |
|
| Author: | LarryJ [ Sun Apr 11, 2021 1:04 pm ] |
| Post subject: | Re: Modifying beach dolly |
RonE58 wrote: I'm a potential TI owner, and was planning on leaving a TI on the beach on its dolly, most of the time. Now I'm learning that a TI can't be left on its dolly. Is there a way to modify the dolly, or get one that can support a TI? Thanks Ron page 38 of the Owner's manual says you can store it on two cradles. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|