Hobie Forums
http://www.hobie.com/forums/

delete
http://www.hobie.com/forums/viewtopic.php?f=71&t=7884
Page 1 of 1

Author:  Howier6 [ Tue Sep 11, 2007 7:21 pm ]
Post subject:  delete

delete

Author:  wcvette [ Thu Sep 13, 2007 6:21 pm ]
Post subject:  AI cart

The tubes are 1"o.d. 12" width outside to outside. Crossbar is 7" below top of tube. The legs are ea. 14", the wheels are 9". The bottom of the boat sits on the crossbar and prevents the tires from rubbing the bottom of the boat. I mention this because one of my boats has the rub burns from wheels. I hope this gives you the info you need.
Bill

Author:  wcvette [ Thu Sep 13, 2007 6:28 pm ]
Post subject: 

After reading that description, I was confused myself. Basically an H using 1" tube, then the axle is placed low enough so the tires don't rub bottom of boat. Vertical tubes are 14" and overall width of H is 12"
Hope this is better.
Bill

Author:  Howier6 [ Fri Sep 21, 2007 8:05 pm ]
Post subject:  help appreciated

thanks for the dimensions

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/