Hobie Forums http://www.hobie.com/forums/ |
|
Minor Dent on Hull Bottom of my 2013 Oasis http://www.hobie.com/forums/viewtopic.php?f=72&t=47279 |
Page 1 of 1 |
Author: | Longbikermike [ Sat Apr 20, 2013 6:08 pm ] |
Post subject: | Minor Dent on Hull Bottom of my 2013 Oasis |
Just got home from picking up my 2013 Oasis and noticed there is a minor dent about 10" aft of the rear miragedrive opening. I realize the world isn't a perfect place, but is this a common issue or should I contact my dealer? |
Author: | Jbernier [ Mon Apr 22, 2013 8:55 am ] |
Post subject: | Re: Minor Dent on Hull Bottom of my 2013 Oasis |
Dents are common in roto-molded kayaks, but luckily it's a very simple fix. In the case of your dent (without seeing it) I would guess that just leaving it alone with the kayak resting upside-down in the sun it would probably come out on its own on a nice hot day. If you need to work at it a little bit more - that is also a fairly easy fix - here's a video we put together showing our factory technique http://www.youtube.com/watch?v=OpuIJzMotDg |
Author: | Longbikermike [ Tue Apr 23, 2013 6:49 am ] |
Post subject: | Re: Minor Dent on Hull Bottom of my 2013 Oasis |
Thanks for your input. The dent is very minimal, but bugs because it's a new boat and hasn't even been in the water. I looked at the video and it eased my mind about the dent being permanent. I'll try the "sun bake" fix before trying the "scalding water" fix. Mike |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |