| Hobie Forums http://www.hobie.com/forums/ |
|
| Storing the AI on the AKA braces? http://www.hobie.com/forums/viewtopic.php?f=73&t=11617 |
Page 1 of 1 |
| Author: | JollyGreen [ Wed Jan 21, 2009 1:29 am ] |
| Post subject: | Storing the AI on the AKA braces? |
Is it alright to store the AI upside down resting on the AKA braces? |
|
| Author: | Darwinian [ Thu Jan 22, 2009 11:33 am ] |
| Post subject: | |
If I am not mistaken, that is the recommended way to store it. Ron |
|
| Author: | mmiller [ Thu Jan 22, 2009 1:19 pm ] |
| Post subject: | |
You mean the crossbars? Akas removed? That should be fine. We recommend storing any hull upside down on its "rails". Since the crossbars are bolted to the rails... that makes sense. |
|
| Author: | TIDALWAVE [ Fri Jan 23, 2009 12:27 pm ] |
| Post subject: | Longterm storage on trailer? |
Matt, your response above states that Hobie recommends AI storage upside down on the crossbars. I have my AI on a trailer with the Hobie trailer saddles, with a spread of 67 inches. I have to store my AI over the winter...should I remove it from the trailer and flip it over? |
|
| Author: | mmiller [ Fri Jan 23, 2009 5:50 pm ] |
| Post subject: | |
On the Hobie AI cradles is fine for the AI assembled, but for hulls only... the least load on the bottoms (by storing on the harder rails - upside down) will help prevent distortion. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|