Hobie Forums http://www.hobie.com/forums/ |
|
TI in a pickup bed http://www.hobie.com/forums/viewtopic.php?f=73&t=44450 |
Page 1 of 1 |
Author: | kayakman7 [ Wed Aug 15, 2012 11:01 am ] |
Post subject: | TI in a pickup bed |
I recently loaded my TI into the bed of my pickup, ended up with a slight overhang. |
Author: | PassWind [ Wed Aug 15, 2012 12:56 pm ] |
Post subject: | Re: TI in a pickup bed |
how big was the dent in the underside of the hull after unloading ? |
Author: | NOHUHU [ Wed Aug 15, 2012 1:09 pm ] |
Post subject: | Re: TI in a pickup bed |
Yeah -That's like being "slightly pregnant" |
Author: | kayakman7 [ Wed Aug 15, 2012 6:08 pm ] |
Post subject: | Re: TI in a pickup bed |
There was absolutely no denting. What you can barely see in the photo is a "bed slide" that supports the boat evenly from five foot back to thirteen foot back. Worked really well. |
Author: | NOHUHU [ Wed Aug 15, 2012 7:45 pm ] |
Post subject: | Re: TI in a pickup bed |
Funny, we can't see your safety flag either. |
Author: | KayakingBob [ Wed Aug 15, 2012 7:49 pm ] |
Post subject: | Re: TI in a pickup bed |
It's Hi-vis yellow but not "My whole boat is a safety flag" red |
Author: | tonystott [ Thu Aug 16, 2012 2:38 am ] |
Post subject: | Re: TI in a pickup bed |
Kayakman7, you need one of these |
Author: | kayakman7 [ Thu Aug 16, 2012 4:54 am ] |
Post subject: | Re: TI in a pickup bed |
tonystott wrote: Kayakman7, you need one of these I do, I like that a lot. |
Author: | tonystott [ Thu Aug 16, 2012 6:03 am ] |
Post subject: | Re: TI in a pickup bed |
I got a sailmaker to cut it out of a cheap hi-viz worker vest (which only cost me $4.99 at the local Aldi store) |
Author: | PassWind [ Thu Aug 16, 2012 6:09 am ] |
Post subject: | Re: TI in a pickup bed |
tonystott wrote: Kayakman7, you need one of these Rudder condom ? looks like you had a blowout. Never thought of duct taping them before but |
Author: | trapperjohn [ Wed Aug 22, 2012 9:37 pm ] |
Post subject: | Re: TI in a pickup bed |
kayakman7 wrote: I recently loaded my TI into the bed of my pickup, ended up with a slight overhang. LMAO! I see your bed x-tender, but it does look like 6+ feet of overhang... I hope nothing bad happens on extended trips. I have a more ghetto setup for my AI A darby X-tend-a-bed extender, a piece of 4'X8' omb, and leftover carpet... I have maybe 3' of overhang from my '04 dodge quad 1500... My red shop rag tucked under the rudder bungee tops the masterpiece off! I've traveled 2+ hours one way on California Interstates 25+ times with no problems. |
Author: | tonystott [ Thu Aug 23, 2012 2:45 am ] |
Post subject: | Re: TI in a pickup bed |
PassWind wrote: tonystott wrote: Kayakman7, you need one of these Rudder condom ? looks like you had a blowout. Never thought of duct taping them before but Passwind, that is not duct tape. The rudder cover has been made from a Hi-vis safety vest, so the "duct-tape" is actually retro-reflective material for night visibility. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |