Seat pegs popping out(solution)

Thanks Matt - but the molded female cavities on my boat will not fit a longer seat peg. Dont like using glue either as it will break down eventually under harsh conditions. I pressed the pegs in and drilled a hole sideways through each cavity. Then inserted a cotter pin (from Home Depot). Test drove A.I. through rough waters for 2 hours with minimal saturation below deck. Jeff

_________________
New to PCs and this forum stuff. Had an original Outback and Classic. sold them both for the A.I.. Love the boat and especially this site... (if I can figure out how to use it)