Hobie Forums http://www.hobie.com/forums/ |
|
mirragedrive fin on weird angle http://www.hobie.com/forums/viewtopic.php?f=75&t=20605 |
Page 1 of 1 |
Author: | ChaosDave [ Fri Feb 05, 2010 2:37 am ] |
Post subject: | Re: mirragedrive fin on weird angle |
Took the fin off and it looks like the big tooth on the sprocket is broken so i have ordered part 81129001 which i think is the right bit? |
Author: | mmiller [ Fri Feb 05, 2010 12:27 pm ] |
Post subject: | Re: mirragedrive fin on weird angle |
Yes, that would explain the mis-alignment. The chain has skipped. That is the correct part... 81129001 SPROCKET V2 - THREADED |
Author: | ChaosDave [ Sat Feb 06, 2010 8:36 am ] |
Post subject: | Re: mirragedrive fin on weird angle |
thanks matt |
Author: | ChaosDave [ Sun Feb 07, 2010 11:31 pm ] |
Post subject: | Re: mirragedrive fin on weird angle |
went out today with a friend and his drive failed in the exact same way! Maybe there was a bad batch or something? I have only had my AI since Xmas and his is only a few months old, so these cogs should not be breaking. |
Author: | stringy [ Mon Feb 08, 2010 12:35 am ] |
Post subject: | Re: mirragedrive fin on weird angle |
You could be right ChaosDave though I can't recall reading other posts regarding this problem. Either way it should be covered under warranty. I'd be talking to my dealer! |
Author: | ChaosDave [ Mon Feb 08, 2010 12:55 am ] |
Post subject: | Re: mirragedrive fin on weird angle |
yeh replacement parts on the way. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |