|
Site Rank - Old Salt |
Joined: Tue Jul 19, 2005 6:29 pm Posts: 2763 Location: High Point, NC
|
It can be permanently sealed by plastic welding. To do a good and effective job does require some knowledge and practice. You might be better off taking it to a Hobie dealer and inquiring. They may, or may not, have someone on board that has done it enough to get good at it.
You can also seal any number of small leaks with GOOP. It's a near permanent fix but not if the area involved is subject to much stress or movement. It won't add any structural strength - it just plugs holes.
But take heart - you're not SOL. Your problem can be fixed by some method.
|
|