Hobie Forums http://www.hobie.com/forums/ |
|
TI amas not straight/perpendicular like they on AI - Help! http://www.hobie.com/forums/viewtopic.php?f=75&t=50201 |
Page 1 of 1 |
Author: | Yakaholic [ Wed Jan 15, 2014 9:53 am ] |
Post subject: | TI amas not straight/perpendicular like they on AI - Help! |
Just picked up a 2011/12 TI and the first thing I noticed is that the amas are not right. When assembled the amas have a distinct forward angle rather than be perpendicular to the hull. In simplest terms it looks very much like the Aka braces are both too long by almost an inch. I have a spare "V1" AI aka brace which is shorter and if I jury rig that in seems to be almost perfect. One on the consequences of the forward leaning amas is a pretty saggy set of tramps. Do we have one of those odd situations where a Aka brace of a an odd size because of TI hull changes? So what is the solution? A new set of aka braces? Thanks |
Author: | mmiller [ Wed Jan 15, 2014 10:17 am ] |
Post subject: | Re: TI amas not straight/perpinducur like they are on AI - H |
Give us some dimensions of the braces on the boat... spec here says 22" |
Author: | KayakingBob [ Wed Jan 15, 2014 10:21 am ] |
Post subject: | Re: TI amas not straight/perpinducur like they are on AI - H |
Some early TI's reported (http://www.hobiecat.com/forums/viewtopic.php?f=71&t=30856&) the aka braces were too long. |
Author: | Yakaholic [ Wed Jan 15, 2014 10:44 am ] |
Post subject: | Re: TI amas not straight/perpinducur like they are on AI - H |
mmiller wrote: Give us some dimensions of the braces on the boat... spec here says 22" Matt on the TI They are 23 1/4" from tip to tip and definitely do not make things look square. My V1 AI is 21 1/2" and that looks much better. So yes 22" looks indeed to be what I need. Thanks for the quick reply.... what now on the 2 braces. Hacksaw time? I'm thrilled to get the TI but want everything to be shipshape before taking it on the water. |
Author: | Yakaholic [ Wed Jan 15, 2014 10:53 am ] |
Post subject: | Re: TI amas not straight/perpinducur like they are on AI - H |
KayakingBob wrote: Some early TI's reported (http://www.hobiecat.com/forums/viewtopic.php?f=71&t=30856&) the aka braces were too long. Thanks, I knew there was a thread somewhere about that, I should have looked harder There are even some pics of the sagging tramps and akas angled forward of true perpendicular. I knew it wasn't an optical illusion or anything - |
Author: | Tom Kirkman [ Wed Jan 15, 2014 11:05 am ] |
Post subject: | Re: TI amas not straight/perpinducur like they are on AI - H |
If they are too long it's an easy fix. Remove the end piece and trim the tube back a little. You can eyeball it, but cut less than you think it'll require. Easy to trim more, but hard to put any back on. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |