| Hobie Forums http://www.hobie.com/forums/ |
|
| Centerboard knob bolt on tandem island http://www.hobie.com/forums/viewtopic.php?f=75&t=50798 |
Page 1 of 1 |
| Author: | SeaSpray37 [ Mon Mar 24, 2014 4:28 pm ] |
| Post subject: | Centerboard knob bolt on tandem island |
Does anyone know the centerboard knob bolt size or where to get the replacement? I sheared off the bottom half of the threads on my centerboard knob bolt while getting it off the trailer. Apparently the board wasn't quite all the way up or lowered while unloading. Fortunately, enough was left to repair and save the day of sailing. I didn't see it listed out separately on the parts and didn't know if it was included with the replacement knob. Any insight is appreciated. |
|
| Author: | NOHUHU [ Mon Mar 24, 2014 6:52 pm ] |
| Post subject: | Re: Centerboard knob bolt on tandem island |
Cant measure it but probably a one of these .20 cent Hobie parts: 8030671 SCREW 8-32 X 5/8" PHMS-P (Pan head) or 8031461 SCREW 8-32 x 1" PHMS Try this link in the future. http://www.backyardboats.com/getattachment/9aa50df8-f19a-4017-93f6-badfb8e95c82/adveture-island-and-tandem-island-parts.aspx |
|
| Author: | SeaSpray37 [ Mon Mar 24, 2014 9:11 pm ] |
| Post subject: | Re: Centerboard knob bolt on tandem island |
Thanks for the reply Nohuhu. I've looked through all the parts they have listed, but don't see a match. It's longer than those bolts, so not quite sure what to get. I may just have to take mine out and add some length for a new one. I was hoping to just keep using the one I have and get a backup for my trip to the Keys in a couple weeks. If anyone has already replaced it and knows, please advise. |
|
| Author: | NOHUHU [ Tue Mar 25, 2014 2:00 pm ] |
| Post subject: | Re: Centerboard knob bolt on tandem island |
Could be the centerboard "pin" then. 88991021 No size given. PM or Email Jbernier about that one. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|