2015 TI. Lost right rudder tiller control today. Was able to steer by pulling slack right rudder line from aft seat (middle) hatch. Right and left lines are connected to the forward block.
I videoed the line connections through the middle hatch and see three lines looped over the control arm with the right rudder line loosely running forward and aft. Tonight I found the below diagram but haven’t gone back to video again and investigate, but is there a pulley at the circle in the diagram that the line should run through? My thought is that the line is slack because it has lost the pivot point at this spot. Thanks for any help.
Login
Register
FAQ
