Return to Hobie.com
Hobie Forums
It is currently Mon Mar 18, 2024 9:05 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: AI Mast Holder
PostPosted: Tue May 20, 2008 1:00 am 
Offline
Hobie Team Member

Joined: Wed Dec 07, 2005 11:04 pm
Posts: 598
Location: Hawaii, Big Island
I thought I posted this, but can't find it anywhere. So if it's here in some forum I forgot about please forgive me. OTOH maybe I forgot to hit submitt after preview??? :oops: :oops:

I went to Ace looking for a 4" fitting I could convert to a mast holder for the AI.

Realize that the old 20 ft sq sail could be stashed. The AI needs a holder for:

1. Draw bridges

2. Putting sail away after reaching fishing destination,

3. Getting sail out of way while fighting large fish.

etc etc..

Instead of letting me purchase a 4" connector a staff member went to their supply room and cut me two rings off some surplus ABS 4" pipe. I then cut one in half, and mounted it with hose clamps.


Image

In action:

Image

Image


Hopfully the bungie cord will keep a wave from bouncing the thing out of it's holders.

I don't know how long the ABS will standup before cracking

There should be room in the AI after market for a more professional made version. Either Hobie could contract for them, or have a third party handle the item.

_________________
Image


Top
 Profile  
 
PostPosted: Tue May 20, 2008 3:25 am 
Offline
Site Rank - Captain

Joined: Mon Feb 04, 2008 1:31 pm
Posts: 141
Location: New Jersey
Dan I finally got a good look at your yak

Yakama Racks has a mount called a Multi Mount, it can be re configured to go on the aka's and hold down the mast as you go out, like you are showing here

I did notice the Sifsto Style tube

I thought I was the only guy whose boat looks like that before the launch

Have you seen the YakPAK, by Precision PAK?

I am working closely with them to develop a whole line of kayak fishing specific gear. I use there biggest pak and it really saves me time and keeps my crap organized. The PAK even can withstand a flip. YES, I flipped the AI, without the AMA's. That is a whole other story for a different time. But the PAK didn't open as I flipped the boat back over and there wasn't a garage sale. The PAK also has lots of velcro pockets for your stuff you need quickly

We will be featuring there second generation PAK on www.kayakfishingmagazine.net next week

_________________
Al aka "YAKMAN"


Last edited by yakman on Wed May 21, 2008 2:47 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue May 20, 2008 8:36 pm 
Offline
Site Rank - Captain

Joined: Mon Aug 27, 2007 12:50 pm
Posts: 46
I been thinking of doing something like this for quite some time, I usually furl up the sail and disconnect the lines when I get to my fishing spot but I noticed the tall mast sways a lot and make creaking noises that feels uncomfortable for me. Do you tie down the mast to the kayak for added security?


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 21, 2008 11:37 pm 
Offline
Hobie Team Member

Joined: Wed Dec 07, 2005 11:04 pm
Posts: 598
Location: Hawaii, Big Island
Sweet

Do you mean when the mast is in the horizontal holders? Yes with the bungie illustrated.

If you mean when it's furled no. But make sure your cross piece bolts have been tighten and inserted with loctite

Al

Yakama Racks has a mount called a Multi Mount, it can be re configured to go on the aka's and hold down the mast as you go out, like you are showing here


Hey looks good. But caould not find the diameter they fit. Is yaku OK
I did notice the Sifsto Style tube

I thought I was the only guy whose boat looks like that before the launch


It's only turned at 90 degree to hull. Like I stated don't know if it will take a hit.

Have you seen the YakPAK, by Precision PAK?
Not yet.

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group