Hobie Forums http://www.hobie.com/forums/ |
|
Pro Angler rudder http://www.hobie.com/forums/viewtopic.php?f=78&t=12918 |
Page 1 of 1 |
Author: | EZrider [ Mon Jun 29, 2009 9:50 am ] |
Post subject: | Pro Angler rudder |
Just wondering, Can the PA rudder system handle a 30lbs or more trolling motor? |
Author: | mmiller [ Mon Jun 29, 2009 1:32 pm ] |
Post subject: | Re: Pro Angler rudder |
Not sure what the question is... The rudder can be used to steer regardless of the power input... MirageDrive, Paddle or motor. I would not mount a motor on any of the rudder hardware. |
Author: | EZrider [ Tue Jun 30, 2009 5:05 am ] |
Post subject: | Re: Pro Angler rudder |
Matt, thanks for the reply. Yes just withstand the power output of a motor. No mounting of anything on the rudder. I liked the idea of haveing a motor that drops into the drive well and steering with the rudder. I'm still holding out to see what Hobie comes up with. |
Author: | tilroh [ Tue Jun 30, 2009 8:12 am ] |
Post subject: | Re: Pro Angler rudder |
is the PA rectractable rudder a modular unit that can be purchased separately? It would be perfect for my next home built Mirage powered boat, so would the cool mesh seats. Thanks, Mack |
Author: | mmiller [ Tue Jun 30, 2009 8:39 am ] |
Post subject: | Re: Pro Angler rudder |
The rudder components would be available as spares. The next catalog will include a break down of the boats parts. |
Author: | EZrider [ Thu Jul 02, 2009 5:44 am ] |
Post subject: | Re: Pro Angler rudder |
mmiller wrote: The rudder components would be available as spares. The next catalog will include a break down of the boats parts. Thank you for this. Hobie sent my there spring/summer catalog but no breakdown or parts list for the PA |
Author: | tilroh [ Thu Jul 02, 2009 8:23 am ] |
Post subject: | Re: Pro Angler rudder |
Is there any place to see a drawing of the PA rudder? My 19' stripped planked, designed for Mirage drives hull is nearing the decking stage. I think the PA rudder and seats might make me change my plans. Thanks! |
Author: | mmiller [ Thu Jul 02, 2009 12:55 pm ] |
Post subject: | Re: Pro Angler rudder |
EZrider wrote: mmiller wrote: The next catalog The "next" catalog will be in the fall. I placed the parts diagram onto our support pages soon. This does include a breakdown of the rudder components. http://www.hobiecat.com/support/pdfs/ProAngler-Parts.pdf |
Author: | tilroh [ Thu Jul 02, 2009 1:23 pm ] |
Post subject: | Re: Pro Angler rudder |
Thank you Matt. I've been trying to develop a inboard rudder for a couple of years. I'd much rather call my Hobie dealer and order one. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |