Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 4:13 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Tue Aug 11, 2009 8:03 pm 
Offline
Site Rank - Captain

Joined: Wed Aug 05, 2009 2:47 pm
Posts: 111
Location: Rogers, AR
I have bought the Lowrance x50 DS with the thru the hull mounting kit (not actually through the hull you see :shock: ) and am looking for the picture I thought I saw somewhere of the PA with this thing mounted, along with a rod holder forward of the seat. I guess I can figure it out, but thought a little help on placement would be good. Any takers on giving a "newbie" to all this a little advise?


Top
 Profile  
 
PostPosted: Fri Aug 14, 2009 10:14 am 
Offline
Hobie Team Member

Joined: Sun Jan 06, 2008 1:01 pm
Posts: 43
Location: Oceanside, California
Fish finder installation on Hobie Pro Angler

http://www.youtube.com/watch?v=I-ul14Ct37Q

_________________
Image

OEX Oceanside - Authorized Hobie Dealer
Kayak Fishing Specialists

www.oexoceanside.com


Top
 Profile  
 
PostPosted: Fri Aug 14, 2009 10:25 am 
Offline
Site Rank - Captain

Joined: Wed Aug 05, 2009 2:47 pm
Posts: 111
Location: Rogers, AR
Thank you...I appreciate the you tube video. I did mine just a little different, but am happy with the install.
Now, I just need some help reading the output of the FF. On fish id, I see lots of fish, but when I change back to normal, I don't see any fish arches...only big blobs occasionally. Have any more video learning spots for using the ds 50?
Again, thanks for the help


Top
 Profile  
 
PostPosted: Fri Aug 14, 2009 2:15 pm 
Offline
Hobie Team Member

Joined: Sun Jan 06, 2008 1:01 pm
Posts: 43
Location: Oceanside, California
Ron Papworth wrote:
Thank you...I appreciate the you tube video. I did mine just a little different, but am happy with the install.
Now, I just need some help reading the output of the FF. On fish id, I see lots of fish, but when I change back to normal, I don't see any fish arches...only big blobs occasionally. Have any more video learning spots for using the ds 50?
Again, thanks for the help


1. Leave "Fish Id" off. It will read every bounce back as a fish.

2. I only get arches when I'm
a. - moving quickly over decent size fish (10-20 lbs)
b. - really big fish 30+ lbs

3. The blobs you see could be bait (although it usually shows up as a cloud) or plant-life.......or air bubbles in your epoxy/silicone etc..

Good luck

_________________
Image

OEX Oceanside - Authorized Hobie Dealer
Kayak Fishing Specialists

www.oexoceanside.com


Top
 Profile  
 
PostPosted: Tue Aug 18, 2009 10:09 am 
Offline
Site Rank - Captain

Joined: Wed Aug 05, 2009 2:47 pm
Posts: 111
Location: Rogers, AR
I am wondering if it isn't air bubbles. I used the install kit recommended by Hobie, and felt like I had pressed it well into the marine goop. You think it possible to remove it and reinstall it?
The battery pack that come with the through the hull kit was I thought supposed to be water proof. Yesterday when the batt. level read just over 7 volts the screen went blank. Thinking it probably was the batt's, I got to the place where it was installed, and found the bag was quite wet, inside and out. I reinstalled new batt's and then put them inside a plastic sandwich bag then back i the water proof (supposedly) bag. Any comments. BTW, no great amount of water is ever in the hull. I am also considering buying a 12 volt rechargable batt. Anyone use one, and if so how did you secure it inside the hull? I am talking about a battery that is 2inches by 2inches by 6 inches.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group