Hobie Forums http://www.hobie.com/forums/ |
|
Scotty rod holder ? http://www.hobie.com/forums/viewtopic.php?f=78&t=22688 |
Page 1 of 1 |
Author: | noproangler [ Mon Mar 29, 2010 10:54 pm ] |
Post subject: | Scotty rod holder ? |
Hey folks, I'm wondering if the scotty rod holder w/ the rail mount adapter will work on the PA hand rails. Anyone try this? http://www.austinkayak.com/products/47/Scotty-Baitcaster-Rod-Holder.html |
Author: | bartmandude [ Tue Mar 30, 2010 4:05 am ] |
Post subject: | Re: Scotty rod holder ? |
I'm looking to do the same thing. I've seen posts where people have used the rail mount successfully, but what I can't seem to find is the specifications on the diameter of the side rail. Scotty sells both 7/8" and 1" diameter rail mounts. Does anyone know which is the right one for the Pro Angler? |
Author: | YakFish [ Tue Mar 30, 2010 8:21 am ] |
Post subject: | Re: Scotty rod holder ? |
I use a rail mount for my fish finder...I tried using a Scotty first, but it didn't work (too small)...Then I found one in Hobie's online catalogue, that I bought and it works perfect...I measured the side rails with a caliper and the diameter is closest to 1-1/4" noproangler wrote: Hey folks,
I'm wondering if the scotty rod holder w/ the rail mount adapter will work on the PA hand rails. Anyone try this? http://www.austinkayak.com/products/47/Scotty-Baitcaster-Rod-Holder.html |
Author: | mythman [ Wed Mar 31, 2010 7:25 am ] |
Post subject: | Re: Scotty rod holder ? |
I tried Scotty rail mount from ACK and they were too small for my rails. Good to hear there is a place we can get some that are sized right!!! |
Author: | atavuss [ Wed Mar 31, 2010 9:54 am ] |
Post subject: | Re: Scotty rod holder ? |
I use the Scotty rail mounts and I add a thin rubber shim, works great! not sure but I think it was the #245 on this page: http://www.scotty.com/fishing-gear-equipment/rod-holders/rail-mounts.htm I also added the risers to get the rod up to where it is easier to deal with. my PA is in storage right now so I can't measure the diameter of the rails. here is what they look like: |
Author: | noproangler [ Wed Mar 31, 2010 2:54 pm ] |
Post subject: | Re: Scotty rod holder ? |
Atavuss, Perfect! Thanks for the link and pictures. (worth a thousand words) I measured rails at about 1 5/16'' - just over 1 1/4'' You need to get that PA out of storage and get it wet. nice lookin' rig by the way..... happy trails.... |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |