| Hobie Forums http://www.hobie.com/forums/ |
|
| HOBIE TRAX 2 KAYAK CART Help with measurements? http://www.hobie.com/forums/viewtopic.php?f=78&t=29524 |
Page 2 of 2 |
| Author: | BassnFlash [ Fri Oct 15, 2010 4:47 pm ] |
| Post subject: | Re: HOBIE TRAX 2 KAYAK CART Help with measurements? |
HH: Well done! Love the photos also, thanks man. Going to do these wheels next week to my cart! |
|
| Author: | Halibut hunter [ Sat Oct 16, 2010 2:35 pm ] |
| Post subject: | Re: HOBIE TRAX 2 KAYAK CART Help with measurements? |
BassnFlash wrote: HH: Well done! Love the photos also, thanks man. Going to do these wheels next week to my cart! Post Pics! show me how your's turns out. Also left you a msg. about your cover on that thread. Let me know? You can email me: [email protected] |
|
| Author: | TDK [ Mon Oct 18, 2010 6:30 pm ] |
| Post subject: | Re: HOBIE TRAX 2 KAYAK CART Help with measurements? |
Those wheels look great! You don't have any trouble with the larger wheels rubbing on the bottom of the boat? I worry a little about putting the cart in the front scuppers as they don't seem to be the same distance apart as the rear holes and I'm worried about putting pressure on the walls of the front scuppers. That seems to be a vulnerable spot. I assume you have not had any problems? |
|
| Author: | Halibut hunter [ Fri Oct 22, 2010 5:30 pm ] |
| Post subject: | Re: HOBIE TRAX 2 KAYAK CART Help with measurements? |
TDK, No problems rubbing or with scupper holes. I did add a small piece of closed cell foam between the hull and cart for a little extra cushion. As far as fit in forward scupper holes, cart seems seem just fine. Local dealer said there should be no problem. I know from reading different threads on this forum that I'm not the only one using front scupper holes. Also, I'm sure that Matt Miller has seen these posts too and if it were a bad idea he would have said so. |
|
| Page 2 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|