Hobie Forums http://www.hobie.com/forums/ |
|
Mirage drive V2? http://www.hobie.com/forums/viewtopic.php?f=78&t=42139 |
Page 1 of 1 |
Author: | gotcha [ Sat Apr 14, 2012 5:10 pm ] |
Post subject: | Mirage drive V2? |
I have the new style V2, and my question is how do I change the mast on the turbo fin if I bent it? I bought the replacement package( extra mast, sst turbo fin and some hardware) does it just unscrew? Do I need to carry a special tool? Any opinions? |
Author: | Bcastile [ Tue Apr 17, 2012 3:42 pm ] |
Post subject: | Re: Mirage drive V2? |
The V2 masts just unscrew from the sprockets. There will either be a slot for a screw driver, or a flat side to the mast to grip with pliers. Use some blue loctite when reinstalling the mast though. You may be able to straighten it without removing it too. |
Author: | trout man [ Tue Apr 17, 2012 6:07 pm ] |
Post subject: | Re: Mirage drive V2? |
I bent mine also fishing the IFA a couple weeks ago. Remove the fin and at the bottom of the rod there is a flat spot to grab them with vice grips and just unscrew them |
Author: | SkiPro3 [ Tue Apr 17, 2012 7:31 pm ] |
Post subject: | Re: Mirage drive V2? |
I bent mine this weekend loading onto my trailer (Note to self; Stick a warning flag on the bow to remove the drive before loading.) I removed the ring clip from the adjustor side, then gave the stainless steel rod a good press while holding down the drive to the floor of the kayak and it straightened right out. I reinstalled the ring clip and it's all good now. |
Author: | iceflyer7 [ Tue Apr 17, 2012 8:51 pm ] |
Post subject: | Re: Mirage drive V2? |
SkiPro3 wrote: I bent mine this weekend loading onto my trailer Oh man...that's not good. |
Author: | gotcha [ Wed Apr 18, 2012 2:15 pm ] |
Post subject: | Re: Mirage drive V2? |
Thanks all. I want to make sure I have all the necessary tools to do the job. I really appreciate this forum for all the great idea's( except loading on the trailer w/out removing the drive)L.O.L |
Author: | west coast papaya [ Wed Apr 18, 2012 3:53 pm ] |
Post subject: | Re: Mirage drive V2? |
I agree this forum is great along with u-tube which often gives a great visual presentation. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |