Hobie Forums http://www.hobie.com/forums/ |
|
Click and Go system http://www.hobie.com/forums/viewtopic.php?f=78&t=44100 |
Page 1 of 1 |
Author: | YakFish [ Wed Jul 25, 2012 1:34 pm ] |
Post subject: | Click and Go system |
My PA is a 2009 model and I've been hearing lately about the newer (2010-present) PAs with a click-and-go? system for the Mirage drive slot. My question is...What is it and does anyone have any pics so I can see the difference between my older system and the newer PAs with the click-and-go? |
Author: | islandspeed2001 [ Wed Jul 25, 2012 1:55 pm ] |
Post subject: | Re: Click and Go system |
The click and go is really slick. You simply drop your drive straight down and it will lock the drive in place. The older models required that you turn a dial on each side of the drive to tighten it into place. I have the old system on my Outback but my new PA has the click and go |
Author: | Jbernier [ Wed Jul 25, 2012 2:12 pm ] |
Post subject: | Re: Click and Go system |
Pro Anglers have always have Click n Go - so your boat would also have it. |
Author: | YakFish [ Wed Jul 25, 2012 2:48 pm ] |
Post subject: | Re: Click and Go system |
Thanks for clearing that up for me I'd heard somewhere that Hobie didn't come out with the click-and-go until 2010 and that some of the older model PAs were developing cracks in the drive well. I haven't had any problems, and my PA's hull is virtually water tight except for water from condensation...So thanks again for the reassurance |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |