Masterlock makes a "Viper" lock. I use that. I put it through a skupper hole and back around my roof racks. I use this for long drives too, just some added security in case something happen
| Hobie Forums http://www.hobie.com/forums/ |
|
| Locking PA http://www.hobie.com/forums/viewtopic.php?f=78&t=45523 |
Page 1 of 1 |
| Author: | jims [ Fri Nov 02, 2012 6:18 am ] |
| Post subject: | Locking PA |
Curious if anyone has any suggestions on how to lock up a PA to a vehicle. I'd hate to see my PA find wings and disappear! I've used a cable/padlock through the drive hole and that seems to work but am wondering if anyone else has any recommendations? |
|
| Author: | islandspeed2001 [ Fri Nov 02, 2012 6:38 am ] |
| Post subject: | Re: Locking PA |
Sounds like you already have your answer. I use the same method. |
|
| Author: | SandyToes [ Sat Nov 03, 2012 4:01 pm ] |
| Post subject: | Re: Locking PA |
I do the same, and padlock it to a tie-down point in my pick-up bed. My last set of Yakima towers could be locked, so I used to just run a cable under the crossbar. |
|
| Author: | Doc S [ Sun Nov 04, 2012 1:00 pm ] |
| Post subject: | Re: Locking PA |
Same here... Cable through the sculper and locked to the truck... God Bless, Doc S |
|
| Author: | BentRodyakker [ Fri Nov 16, 2012 2:01 pm ] |
| Post subject: | Re: Locking PA |
AMEN! Doc S |
|
| Author: | Drakes [ Sat Nov 17, 2012 8:02 pm ] |
| Post subject: | Re: Locking PA |
Masterlock makes a "Viper" lock. I use that. I put it through a skupper hole and back around my roof racks. I use this for long drives too, just some added security in case something happen
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|