Hobie Forums http://www.hobie.com/forums/ |
|
2" or 3"??? http://www.hobie.com/forums/viewtopic.php?f=78&t=47414 |
Page 1 of 1 |
Author: | Yak Finaddic [ Tue Apr 30, 2013 4:17 pm ] |
Post subject: | 2" or 3"??? |
I just replaced my PVC bunks to 3" and wanted to know if you all had a preference? My second try was hugely improved over my first ones, hopefully this time my hardware won't come off... Ill try to post pics later... |
Author: | Tom Kirkman [ Tue Apr 30, 2013 5:30 pm ] |
Post subject: | Re: 2" or 3"??? |
I used 2 inch on the original design because it fits the hull troughs better. It's also more flexible and conforms to the hull easier, which is what I was after when I came up with the idea. I'm sure other sizes can be successfully employed. |
Author: | Yak Finaddic [ Tue Apr 30, 2013 6:29 pm ] |
Post subject: | Re: 2" or 3"??? |
Tom Kirkman wrote: I used 2 inch on the original design because it fits the hull troughs better. It's also more flexible and conforms to the hull easier, which is what I was after when I came up with the idea. I'm sure other sizes can be successfully employed. Thanks for the reply Tom. I really appreciate all your videos on YouTube. I will soon be changing my trailer setup to mimic your rig to hold 2 PAs. One more question, how do you rig your bolts? Do you apply loctite? Do you do two nuts? |
Author: | Tom Kirkman [ Tue Apr 30, 2013 6:48 pm ] |
Post subject: | Re: 2" or 3"??? |
Nylon lock nuts. That allowed us to leave them just slightly loose in order to allow some movement of the parts and pieces due to temperature changes, loaded, unloaded, etc. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |