| Hobie Forums http://www.hobie.com/forums/ |
|
| Old PA vs New PA specs http://www.hobie.com/forums/viewtopic.php?f=78&t=47981 |
Page 1 of 1 |
| Author: | nvydvrdude [ Mon Jun 10, 2013 6:33 pm ] |
| Post subject: | Old PA vs New PA specs |
I was looking at some pictures of PA's on Amazon and noticed that the older model seems to not be as wide as the new model or was it an optical illusion. I looked for some old specs but could find none. |
|
| Author: | Yakiddy Yak [ Wed Jun 12, 2013 4:49 pm ] |
| Post subject: | Re: Old PA vs New PA specs |
Hello! Because I don't throw anything out, I still have an old catalogue here... It says it is 38" wide which is the same as the new model. It is definitely an optical illusion, I knew what you meant as soon as I read your post, though I checked to be sure. The new seat sits up and is more... airy looking for lack of a better word. Since you see more of the width, it looks wider. It's not broken up by the cutting hatch, either. Hope that helps. |
|
| Author: | AllElectricPA14 [ Thu Jun 13, 2013 5:37 am ] |
| Post subject: | Re: Old PA vs New PA specs |
I have a 2010 PA14 which I just went out and measured. 38 1/2 inches at the gunwales at mid seat. I believe it was 39 inches in the literature of the time. And that could easily be as there is some tumblehome on the sides at that point. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|