| Hobie Forums http://www.hobie.com/forums/ |
|
| how to clean PA? http://www.hobie.com/forums/viewtopic.php?f=78&t=49122 |
Page 1 of 1 |
| Author: | kapnbill [ Sat Aug 31, 2013 1:41 pm ] |
| Post subject: | how to clean PA? |
Just bought a used PA but it needs a good cleaning. What is recommended? Are there any cleaners or protectants I should not use? I use bassboatsaver on my bass boat and its great stuff. Is it ok on the PA? Thanks |
|
| Author: | sailhoky [ Mon Sep 02, 2013 6:38 am ] |
| Post subject: | Re: how to clean PA? |
We use Krud Kutter. Spray it on, let it sit for a couple of minutes, then wipe it off and all the dirt and 99.9% of the stains come off on your rag. Have a lot of clean rags handy, they fill up fast with dirt, etc. Use brush for hard-to-get-to places. We then power wash to remove any left over KK. Amazing stuff and it's FAST. After the boat is dry, use Hobie Protectant or 303 on topside (except where you might usually step) and hull. Easier to clean the boat next time because not as much sticks to it anymore. |
|
| Author: | islandspeed2001 [ Mon Sep 02, 2013 12:53 pm ] |
| Post subject: | Re: how to clean PA? |
My first trip would be to the car wash. You can then tell where stains are. A little Ajax and a scrub brush will normally take care of those. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|