Hobie Cat Forums

It is currently Wed Aug 27, 2014 5:08 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon Sep 09, 2013 3:49 am 
Offline
Site Rank - Deck Hand

Joined: Tue Mar 13, 2012 9:20 am
Posts: 8
Hi guys,

i was out in moderate seas with 16 mph winds and ended up calling for a tow from the coastgaurd.
Close hauled, my friend hiking out on trapeze, the mast suddenly came crashing down. We struggled to pull the mast back on board and take the sail down. This was particularly hard with the mast head float as each 5 foot wave would pick the mast up and dump it on us.

Once we have lashed the mast down and radioed for some assiatnce, we saw that the problem was the shroud/stanchion on the starboard side had snapped cleanly through just below its attachment to the mast. There was no sign of corrosion or rust. The break happened inside the plsatic covering of the wire!

my question is, how frequently should we replace the rigging? Is there any way to assess it other than looking? My boat in a 2005 Hobie 15 club. Do i need to replace all the rigging now or just the broken stanchion?

thanks

Graham


Top
 Profile  
 
PostPosted: Mon Sep 09, 2013 5:24 am 
Offline
Site Rank - Old Salt

Joined: Mon Sep 19, 2005 10:18 am
Posts: 752
Location: Virginia Beach VA
Plastic jacketing on wires reduces injury. Otherwise it obscures corrosion when it is nicked and water, especially salt water, gets in. I've heard five years is a good replacement interval but I know guys who've gone much longer. Replace all of them at the same time including bridles, fore-stay and trap wires. Don't forget the pig tail at the top of the jib too. If you are going with aftermarket, off brand or DIY rigging make sure they are double swaged.


Top
 Profile  
 
PostPosted: Thu Oct 17, 2013 7:13 am 
Offline
Site Rank - Deck Hand

Joined: Wed Oct 02, 2013 2:12 am
Posts: 4
Those wires can take a beating, we had one of ours on the verge of failing before we replaced it. (it had become a user hazard, wires everywhere!)

It never broke clean on us though, luck of the draw for you I guess..


Top
 Profile  
 
PostPosted: Tue Oct 29, 2013 8:10 pm 
Offline
Site Rank - Admiral

Joined: Mon Nov 26, 2012 7:36 pm
Posts: 156
It all depends what you're doing. Racing in salt water is recommended 1-2 year life for rigging. Our fleet tends to sail in 15-25kt wind... and I took a swim on Saturday when my "can't miss" trap line ring snapped and left me swimming after my flipped Miracle 20.

How hard do you sail? How often to you rinse it down after a salt water use? How often do you sail?

5 Years can probably work if you're not pushing it all the time.

_________________
Tom
Fleet 259, Central Coast CA
H18 ('81)
H18 ('85)
H20 ('97)
H18 ('78)


Top
 Profile  
 
PostPosted: Wed Oct 30, 2013 8:37 am 
Offline
Site Rank - Old Salt

Joined: Fri Dec 28, 2007 11:23 am
Posts: 538
Location: Lake Norman NC
I use a product called Sharkhide on all the rigging when new and at the first of every sailing season
I use a Q-tip for applying
Quality rigging every 5 years is a must around salt water
Keep the best old wire in the Hobie Hell box for an emergency spare
Former Hobie Admiral Gary


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group