Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 1:59 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Tue Oct 16, 2012 11:54 am 
Offline
Site Rank - Old Salt

Joined: Sat Nov 06, 2010 8:10 am
Posts: 681
Location: Satellite Beach, FL
Saw this on eBay: http://bit.ly/RywzPz

I can't imagine that it would provide much more flotation than a well sealed mast.

_________________
Zach


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 12:02 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jul 19, 2005 6:29 pm
Posts: 2763
Location: High Point, NC
If it's installed inside the mast, then it provides zero additional floatation over a sealed mast tube. Adding something inside a sealed item does not affect that item's displacement.

Maybe they assume the person that buys it doesn't have a sealed mast.


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 12:33 pm 
Offline
Site Rank - Admiral

Joined: Sun Oct 07, 2012 8:05 pm
Posts: 237
Location: New Hampshire
If I'm reading the instructions right, combined with all the screws, it's attached along the tip of the mast on the outside. Looking at the instructions, I can see why Hobie discontinued it.

Fay's is the nearest Hobie dealership to me, and has been incredibly helpful. My guess is they're clearing out their attic and getting rid of some discontinued stuff. When I was up there a couple of weeks ago buying a Baby Bob, the guy did not suggest this to me.

Best of luck,

Jim Clark-Dawe


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 1:47 pm 
Offline
Site Rank - Admiral

Joined: Thu Sep 23, 2010 1:58 pm
Posts: 186
Location: SE Michigan / NE Indiana
I've seen this in person installed on a mast. Its on the outside of the comptip and low-profile = low windage and looks much better than a bob. According to Rick at Midwest Sailing it works quite well.

_________________
Jeff R
'88 H18 Jolly Mon
'10 F18 Closely Called
cramsailing.com


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 2:55 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jul 19, 2005 6:29 pm
Posts: 2763
Location: High Point, NC
If it's on the outside, then it would add to the mast displacement, not duplicate it.

I've often wondered if an interior CO2 type balloon could be deployed and inflated only when needed. Seems that this would be a real boon to sailors, although I suspect the ability to only have one available at a time might be the downfall of it. Some guys capsize several times in an afternoon.


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 3:36 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15027
Location: Oceanside, California
Quote:
According to Rick at Midwest Sailing it works quite well.


I believe that is a Midwest product, so makes sense. The padding flotation is only fully effective when the boat is nearly turtled. The surface area blocks the flow of air across the sail. It is also a MUCH larger surface area than the baby bob.

The padding one works ok. Bob just works MUCH better.

Bob is Aerodynamic
Bob presents less surface area than most human heads... and is more aerodynamic for sure.
Bob is positioned to keep the mast above water as best as possible.
Bob... looks aren't everything! :)

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 6:28 pm 
Offline
Site Rank - Admiral

Joined: Thu Sep 23, 2010 1:58 pm
Posts: 186
Location: SE Michigan / NE Indiana
Not having tried this particular one out, I can't say either way. Relative theoretical affects of mass up top, windage, etc. can be complicated - It's been a while since I've used my calculus, so I'll defer to those with more experience than I :D

_________________
Jeff R
'88 H18 Jolly Mon
'10 F18 Closely Called
cramsailing.com


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 7:09 pm 
Offline
Site Rank - Deck Hand

Joined: Sat Dec 31, 2011 9:32 pm
Posts: 18
Location: Erie, Pennsylvania
Bob reminds me of Lance Armstrong's helmet so, despite USADA, I vote for Bob!


Top
 Profile  
 
PostPosted: Wed Oct 17, 2012 5:51 am 
Offline
Site Rank - Old Salt

Joined: Sun Mar 16, 2008 10:46 pm
Posts: 470
IMO, drilling pilot holes and then putting screws in the tip of a mast is, ah, not cool... On the other hand, my wife says not cool on turtling. To quote: "You have this $10K boat and it can invert in the water, right? When it does it can damage the mast and sails that cost $2k and up and you say the replacement mast would be a nightmare to ship, right? And someone designed a boat without something to keep this from happening? Now what's smart about that..."


Top
 Profile  
 
PostPosted: Wed Oct 17, 2012 12:26 pm 
Offline
Site Rank - Captain

Joined: Tue Apr 14, 2009 4:47 pm
Posts: 41
Location: Odense, Denmark
This one is inflated automatically, like a PDF and is hoisted not screwed into the mast. I guess it could even be hoisted AFTER you capsized, if you don't want it permanently in the mast.

Its much smaller than the foam thingie , but much more expensive (but what's a life worth nowadays?)

PS: How many would they need on Oracle AC72 ? ;-)

http://www.secumar.com/secumar/php/main ... ukte&id=77

Image

_________________
Poul
FxOne 165
Image
I'd Rather Regret The Things I Did, Than The Things I Didn't


Top
 Profile  
 
PostPosted: Thu Oct 18, 2012 10:32 pm 
Offline
Site Rank - Old Salt

Joined: Wed Jul 06, 2005 2:15 pm
Posts: 1195
Location: Oakland, CA
The flotation device was on a 16 I bought used and it did a good job keeping the boat from turtling, but when wet it added weight to the end of the mast and made righting a bit more difficult. It is screwed to the comptip. I used it for a couple years and took it off because of the difficulty righting the boat and the first capsize turned into a turtle, but at least it was easier to right.

The boat turtled only once again but then mysteriously didn't do it again.


Top
 Profile  
 
PostPosted: Fri Oct 19, 2012 6:49 am 
Offline
Site Rank - Old Salt

Joined: Mon Sep 19, 2005 10:18 am
Posts: 778
Location: Virginia Beach VA
I don't see what anyone has against the bob except it is not class legal for racing. Anything that gives you more confidence to fly hulls and otherwise sail on the edge is okay in my book.


Top
 Profile  
 
PostPosted: Wed Oct 24, 2012 10:57 am 
Offline
Site Rank - Old Salt

Joined: Sun Dec 23, 2007 1:20 pm
Posts: 493
Location: Clearwater, FL
I have been using a Baby Bob on my 1982 H16 for years and am not embarrassed about it.

Since I solo most of the time, I don't want to turtle if I can help it since the top of the mast may end up hitting the bottom and get either bent or stuck in the mud/sand. Baby Bob also keeps the top of the mast higher out of the water after a capsize and therefore makes it easier to get wind under the upper part of mainsail while uprighting.

Even in a pitchpole, the Baby Bob helps to keep the boat from turtling since the boat usually ends up on it's side.

Image

_________________
Tim
84 H16
82 H16
87 H14T
Tortola Sails: 115222
Blue Prism Sails: 88863
Clearwater, FL
Image


Last edited by Tim H16 on Tue May 18, 2021 9:28 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Oct 25, 2012 8:17 am 
Offline
Site Rank - Old Salt

Joined: Mon Jul 16, 2007 7:58 pm
Posts: 429
Location: Indianapolis, IN
Three of the H16 sailors in my club, who had suffered damage from turtles in the past, went out and bought Baby Bobs as soon as they saw my Wave.

I've even had monohull sailors ask me about it. Our lake is quite shallow in spots, and you can find several kinked masts around the club.

_________________
What - Me Worry?


2006 Hobie Wave 7358
"Ish Kabibble"


Top
 Profile  
 
PostPosted: Tue Oct 30, 2012 9:03 am 
Offline
Site Rank - Captain

Joined: Sat Oct 20, 2007 4:23 pm
Posts: 95
Location: San Diego, CA
Matt, I noticed that the Hobie 16 in the picture is using a Baby Bob. Would a Baby Bob work on a Getaway or is it too small?

_________________
Practice makes perfect, so be careful what you practice...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group