Hobie Forums
http://www.hobie.com/forums/

Ding in alumnium hobie 16 mast
http://www.hobie.com/forums/viewtopic.php?f=9&t=46131
Page 1 of 1

Author:  gary eudy [ Wed Jan 02, 2013 3:44 pm ]
Post subject:  Ding in alumnium hobie 16 mast

Hobie Matt
need your opinion I found a small dent in the side of the hobie 16 mast it is about 1/8 ' deep and could be covered by a silver dollar The dent is about 6' from the mast base This is not a comp tip This is my son's boat and I do not have a clue what did this and probably do not want to know. Other than this it is ocean ready
Time to panic or no big?
Former Hobie Admiral Gary

Author:  MBounds [ Wed Jan 02, 2013 7:42 pm ]
Post subject:  Re: Ding in alumnium hobie 16 mast

Probably OK in everything but the biggest breeze. I'd be real watchful of the mast counter rotating. That's hard on the mast to begin with.

A picture would help.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/