Return to Hobie.com
Hobie Forums
It is currently Mon Mar 18, 2024 8:00 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Project Redline...
PostPosted: Tue Mar 27, 2012 4:43 am 
Offline
Site Rank - Old Salt

Joined: Mon May 09, 2005 10:25 am
Posts: 4176
Location: Jersey Shore
Hobie, for some reason, does't provide torque specs for any fasteners. The screws used on the anchor plates are 1/4-20. A quick search online shows that for 1/4-20 screws, you probably want about 5 to 7 ft-lbs of torque. Having said that, I've always just made them good and snug using a standard 3/8 socket driver. If you go overboard, you will shear them off.

As far as laying in the glass with the hulls upright, I think that would be very difficult. You will be fighting gravity and working upside down. Easiest would be to disassemble the boat completely so you can orient the hull so that gravity helps you. Probably with the corner od the hull seam pointing down.

sm


Top
 Profile  
 
 Post subject: Re: Project Redline...
PostPosted: Tue Mar 27, 2012 6:39 am 
Offline
Site Rank - Old Salt

Joined: Sat Jul 25, 2009 11:19 pm
Posts: 340
Location: San Diego
I hate re-lacing the tramp and removing the bolts that hold the crossbars on to the hulls so I decided to leave them on. I flipped the boat over by taking it off the trailer and then my buddy and I picked up the bows and walked them into the air. It was rather easy to get the bows pointed strait up, then we walked around to the other side and lowered the bows. My buddy has real back problems and he said it was easy. Also you must tie the sterns down to ground other wise they slide around as your trying to pick them up.

I think its important to have the boat upside down, and even better at an angle of 45 deg so that corner is low spot. It is VERY FRUSTRATING trying to remove the bead of glue. A hand held rasp and a grinder is what I used. I was really careful.

_________________
ALLEY CAT 1984 RED LINE HOBIE 18 MAGNUM
Sail # 10505 or 277
Image Image


Top
 Profile  
 
 Post subject: Re: Project Redline...
PostPosted: Tue Mar 27, 2012 7:26 am 
Offline
Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 5197
Location: Detroit, MI
It's a lot easier to flip the boat over sideways.

If you do it in the grass, you don't need to pad anything.


Top
 Profile  
 
 Post subject: Re: Project Redline...
PostPosted: Tue Mar 27, 2012 11:50 am 
Offline
Site Rank - Admiral

Joined: Thu Sep 23, 2010 1:58 pm
Posts: 186
Location: SE Michigan / NE Indiana
My neighbors are gonna love me. It won't help that I'll be violating at least 3-4 different HOA bylaws (and I'm on the board!).

_________________
Jeff R
'88 H18 Jolly Mon
'10 F18 Closely Called
cramsailing.com


Top
 Profile  
 
 Post subject: Re: Project Redline...
PostPosted: Tue Mar 27, 2012 6:26 pm 
Offline
Site Rank - Captain

Joined: Wed Jul 13, 2011 8:18 am
Posts: 75
rehmbo wrote:
My neighbors are gonna love me. It won't help that I'll be violating at least 3-4 different HOA bylaws (and I'm on the board!).


Man I hate the HOA. My friends had 2 16 in there back yard surrounded by a privacy fence. the mast stuck up like 2 feet over the fence when they where trailered. and the HOA filed a complaint. What is wrong with people these days........


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group